Transitioning solidification mode via electroplated Ni coatings in martensitic stainless steel resistance spot welds: new insights into fabricating tough microstructure

The present study addresses the enhancement of fracture toughness of martensitic stainless steel (MSS) spot welds by utilizing through electroplating of Ni on MSS sheets. The equilibrium and non-equilibrium solidification modelling showed that by Ni coating with 50 mu m thick on 1.5 mm thick MSSs, the solidification mode changes from delta-ferrite to gamma-austenite, leading to a weld nugget (WN) dominated by austenite grains. Moreover, electron backscatter diffraction (EBSD) and electron probe microanalysis (EPMA) showed that the other phases (martensite, delta-ferrite) appeared in band areas of WN owing to incomplete mixing of MSS and the Ni-coating. The tough microstructure in the Ni-coated MSS spot welds provided superior mechanical properties compared to non-coated welds, both in cross-tension (CT) and tensile-shear (TS) tests. Notably, the TS and CT strengths of the Ni-coated MSS spot welds showed a remarkable increase of 57% and 127%, respectively, in comparison to the conventional bare MSS spot welds. Furthermore, in terms of failure energy, the Ni-coated MSS spot welds demonstrated a substantial enhancement of 296% in TS and 520% in CT, when compared to their non-coated counterparts. This research study showcased the effectiveness of Ni electroplating as an industrial method for improving the spot weldability of MSSs.