Different alkaline earth metals doped Sm0.5A0.5Fe0.9Ni0.1O3-δ (A=Ca, Sr and Ba) for symmetric solid oxide fuel cells

Symmetric solid oxide fuel cells have gained increasingly attention due to their charac-teristics of simple fabrication and low cost. Due to the same anode and cathode used, the oxygen reduction reaction (ORR) and hydrogen oxidation reaction (HOR) of the electrodes are very demanding. In this work, Sm-0.5 x 0.5Fe0.9Ni0.1O3-delta (X = Ca, Sr, Ba, SCFN, SSFN, SBFN) were synthesized, and the physico-chemical properties of three materials and their elec-trochemical performance as electrodes were systematically studied. They all maintain stable phase structures under oxidizing and reducing atmospheres below 750 degrees C. X-ray photoelectron spectroscopy (XPS) results showed that metal nanoparticles was exsolved and oxygen vacancies were increased after the treatment in reducing atmosphere at 750 degrees C. For electrochemical performance test, the peak power densities of symmetrical cells with SCFN-GDC, SSFN-GDC and SBFN-GDC electrodes can reach 26.7, 186.78, and 138.8 mWcm(-2) at 750 degrees C, respectively. Moreover, SSFN-GDC cell showed better long-term sta-bility than the other two. (c) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.