Design and Performance Analysis of 32 x 32 Memory Array SRAM for Low-Power Applications

Computer memory comprises temporarily or permanently stored data and instructions, which are utilized in electronic digital computers. The opposite of serial access memory is Random Access Memory (RAM), where the memory is accessed immediately for both reading and writing operations. There has been a vast technological improvement, which has led to tremendous information on the amount of complexity that can be designed on a single chip. Small feature sizes, low power requirements, low costs, and great performance have emerged as the essential attributes of any electronic component. Designers have been forced into the sub-micron realm for all these reasons, which places the leakage characteristics front and centre. Many electrical parts, especially digital ones, are made to store data, emphasising the need for memory. The largest factor in the power consumption of SRAM is the leakage current. In this article, a 1 KB memory array was created using CMOS technology and a supply voltage of 0.6 volts employing a 1-bit 6T SRAM cell. We developed this SRAM with a 1-bit, 32- x 1-bit, and 32 x 32 configuration. The array structure was implemented using a 6T SRAM cell with a minimum leakage current of 18.65 pA and an average delay of 19 ns. The array structure was implemented using a 6T SRAM cell with a power consumption of 48.22 mu W and 385 mu W for read and write operations. The proposed 32 x 32 memory array SRAM performed better than the existing 8T SRAM and 7T SRAM in terms of power consumption for read and write operations. Using the Cadence Virtuoso tool (Version IC6.1.8-64b.500.14) and 22 nm technology, the functionality of a 1 KB SRAM array was verified.