Simple adsorptive removal of crystal violet, a triarylmethane dye, from synthetic wastewater using Fe (III)-treated pine needle biochar

Untreated and Fe (III)-treated pine needle biochar (PNB) were evaluated at different pH for the removal of toxic crystal violet (CV) dye from synthetic wastewaters. Adsorption kinetics followed the pseudo-first-order kinetics involving intra-particle diffusion process. The adsorption rate constant increased with Fe treatment of PNB especially at pH 7.0. Adsorption data of CV conformed well to Freundlich adsorption isotherms and both adsorption capacity (ln K) and order of adsorption (1/n) of CV were nearly doubled with Fe (III) treatment of PNB at pH 7.0. Desorption of adsorbed CV from both untreated and Fe (III)-treated PNB could be accounted satisfactorily by third-degree polynomial equations. An increase in ionic strength and temperature enhanced dye adsorption onto untreated and Fe (III)-treated PNB. Adsorption of CV was an endothermic and spontaneous reaction with an increase in entropy of the system. FTIR spectra revealed that C = O of carboxylic acid aryls and C = O and C-O-C in lignin residues of PNB reacted with Fe (III) besides the formation of some iron oxyhydroxide minerals. The changes in FTIR confirmed the possible bonding of positively charged moiety of CV with the untreated and Fe-treated PNB. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) revealed the porous surfaces of PNB with clear accumulation of Fe (III) after treatment and deposition of CV dye on surfaces and pores of PNB. Iron (III)-treated PNB at pH 7.0 can serve as an ecofriendly and cost-effective adsorbent for the efficient removal of CV dye from wastewaters.