Evaluating the Accuracy of Dental Restorations Manufactured by Two CAD/CAM Milling Systems and Their Prototypes Fabricated by 3D Printing Methods: An In Vitro Study

Purpose: This in vitro study was conducted to evaluate the marginal accuracy of all-ceramic onlay restorations and prototypes fabricated using additive and subtractive methods. Materials and Methods: Ten typodont first molars were prepared and scanned two times using two different scanners: ARCTICA AutoScan (KaVo Dental) and CEREC Omnicam (Dentsply Sirona). The two groups of virtual models were used to design two groups of virtual onlay restorations using two different CAD software (n = 10 each group) and exported in STL files. Each group of STL files was converted to physical onlay restorations and prototypes by using three different methods; these included two additive manufacturing techniques, stereolithography apparatus (SLA) and digital light processing (DLP), and one subtractive technique, e.max milling using the KaVo Everest system and the Dentsply Sirona inLab MC X5. A digital microscope was used to evaluate the marginal fit around the onlay restorations or prototypes on the typodont teeth. Results: All evaluated groups showed mean marginal gaps between 59 and 84 & mu;m. No statistically significant differences were found when comparing the marginal accuracy of onlay restorations fabricated by the subtractive method and onlay prototypes from the two additive methods, SLA (P = .70) and DLP (P = .21). Conclusion: All the models evaluated produced marginal gaps within the reported acceptable clinical range. Thus, these subtractive and additive methods may be considered suitable for onlay restoration production.