Research on the Adaptability of Packers for Integrated String Fracturing Operations in Low Porosity and Low Permeability Reservoirs

被引:1
作者
Wan, Zhiyong [1 ,3 ]
Yu, Hao [1 ]
Xiao, Yong [2 ]
Zhao, Zhaoyang [1 ]
Lian, Zhanghua [1 ]
Chen, Fangxin [1 ]
机构
[1] Southwest Petr Univ, State Key Lab Oil & Gas Reservoir Geol & Exploitat, Chengdu, Peoples R China
[2] Chengdu North Petr Explorat & Dev Technol Co Ltd, Chengdu, Peoples R China
[3] Southwest Petr Univ, State Key Lab Oil & Gas Reservoir Geol & Exploitat, Chengdu, Peoples R China
来源
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING | 2024年 / 70卷 / 3-4期
关键词
low porosity and low permeability reservoirs; integrated pipe string; packer rubber ring; acid fracturing; finite element simulation; HALFAYA OIL-FIELD;
D O I
10.5545/sv-jme.2023.662
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
To study the failure of conventional packers in the fracturing and stimulation of low-porosity and low-permeability reservoirs and reduce the failure accidents of packers in the fracturing process, a suitable integrated string packers was selected in the process of fracturing and stimulation in an oilfield in the Middle East as a case study. Three different well types have been established. The wellbore temperature distribution and the axial force of the string can be calculated under the conditions of various wellhead pressures and different displacement, and it is found that the temperature at the bottom of the well can reach 130 degrees C, and the maximum axial force at the wellhead is 500 kN. At the same time, the applicability of retrievable tubing testing squeeze (RTTS) and hydraulic-set retrievable (RH) packer in different working conditions was evaluated, and it was found that only RTTS packers can meet the needs of the oil field. According to the calculated temperature field and axial force distribution, the stress on different components of the packer under different working conditions is established during the fracturing-stimulation operation. In the worst working conditions, the maximum stress of the packer occurs at the lower part of the central pipe, reaching 303.83 MPa, which is in a safe state. The contact stress on rubber rings can reach 30 MPa, indicating that the sealing performance can meet the requirements of on-site use. The temperature and axial force data calculated by the model provide a theoretical basis for safe well control. At the same time, through model evaluation, it was found that the RTTS packer can be suitable for the fracturing and stimulation needs of the oilfield. The research methods and achievements in the article provide theoretical guidance for evaluating the applicability of packers in the fracturing and stimulation process of low porosity and low permeability reservoirs.
引用
收藏
页码:116 / 127
页数:12
相关论文
共 20 条
[1]  
Al-salali Y, 2013, SPE KUWAIT OIL GAS S, DOI [10.2118/164311-MS, DOI 10.2118/164311-MS]
[2]  
Bybee K., 2006, Journal of Petroleum Technology, V58, P54, DOI [10.2118/0706-0054-JPT, DOI 10.2118/0706-0054-JPT]
[3]   Investigation on the Depth of Slip Hanger Teeth Bite into Casing and the Mechanical Properties of Casing under Different Suspension Loads in Ultra-Deep Wells [J].
Chen, Yong ;
Tan, Jinjin ;
Xiao, Guoping .
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2021, 67 (10) :516-524
[4]  
Cohen C E., 2010, Society of Petroleum Engineers, DOI DOI 10.2118/134495-MS
[5]   The impact of thermal ageing on sealing performance of HNBR packing elements in downhole installations in oilfield wellhead applications [J].
Hassani, Farzaneh ;
Faisal, Nadimul H. ;
Nish, Ryan ;
Rothnie, Stuart ;
Njuguna, James .
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, 2022, 208
[6]  
Hu G., 2018, Southwest Petroleum University, DOI [10.27420/d.cnki.gxsyc.2018.000425, DOI 10.27420/D.CNKI.GXSYC.2018.000425]
[7]   Mechanical response of the sealing packer based on two rubber materials at high temperatures [J].
Jin, Lan ;
Xue, Zhangna ;
Wang, Zidong ;
Li, Ruiyong ;
Liu, Jianlin .
POLYMER TESTING, 2023, 124
[8]   Water Hammer Investigation of the Shut-Down of a High-Head Hydropower Plant at Very High Reynolds Number Flows [J].
Karadzic, Uros ;
Bergant, Anton ;
Starinac, Danica ;
Bozovic, Bosko .
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2019, 65 (7-8) :430-440
[9]   Evaluation of the Young's Modulus of Rubber-Like Materials Bonded to Rigid Surfaces with Respect to Poisson's Ratio [J].
Koblar, David ;
Skofic, Jan ;
Boltezar, Miha .
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2014, 60 (7-8) :506-511
[10]   Failure analysis and structural optimization of rubber core and support rib of full-size spherical blowout preventer [J].
Liu, Yang ;
Qian, Liqin ;
Xia, Chengyu ;
Zou, Jiayan ;
Lian, Zhanghua ;
Yi, Xianzhong .
ENGINEERING FAILURE ANALYSIS, 2023, 143