Suppression of cutting vibration in side milling of laser cladded layer on thin-walled parts with interfacial structures

Laser cladding is being employed for repairing high-end components including thin-walled parts. The heterogeneous interface between cladding layer and substrate can exacerbate cutting vibration during subsequent machining, becoming a bottleneck in remanufacturing thin-walled parts. This paper focuses on exploring the effect of interfacial structures on cutting vibration suppression in side milling of laser cladded layer on thinwalled parts. First, the interfacial structure was proven to be effective for suppressing cutting vibration by increasing modal damping, although the stiffness shows a decreasing trend. Among different interfacial structures, triangular structure showed the best role in cutting vibration suppression, followed by rectangular, semicircular, and trapezoid. Then, the effects of different structural parameters on cutting vibration suppression were further analyzed based on a Taguchi design. The results showed that the cutting vibration decreases with the smaller interfacial shape factor, larger depth and smaller spacing of interfacial structures. The interfacial structure would be optimal when the interfacial shape factor is 0.06, the interfacial depth is 3.0 mm, and the spacing is 0 mm. As a result, the cutting vibration during milling was reduced by 55.28 %. These findings provide a theoretical basis for high-quality remanufacturing of the thin-walled parts.