Experimental study of gas-particle flow in the coal-fired industrial boiler applied radial air staging at variable over-fired air distributions

Radial air staging is an innovative method for reducing NOx emissions from coal-fired boilers compared to conventional axial air staging. However, an important issue in using this method is to set the over-fired air (OFA) distribution rationally to achieve good boiler performance. This paper aims to optimize the OFA distribution by evaluating important gas-particle (GP) parameters that influence the pulverized coal (PC) combustion performance. The GP flow experiment is conducted in a laboratory furnace model of a coal-fired boiler with different OFA distributions. The experimental results show that as RIO (Two-level OFA distribution ratio) changes from 0:1 to 1:0, the mixture of the OFA jet and airflow in the main combustion zone is advanced, which is conducive to PC burnout. Meanwhile, the size of the central recirculation zone decreases, resulting in poor PC ignition. It is worth noting that at RIO of 1:0, the central recirculation zone disappears at section y/d = 2.5, indicating that there is no high-temperature flue gas downstream to heat the fresh PC particles, which is extremely unfavorable for the stable combustion of the PC. In addition, at RIO of 0:1, compared to other cases, there are more particles in the central recirculation zone, which promotes the reduction reaction of N element released from PC particles, thus reducing NOx emission. According to the comprehensive evaluation, it is recommended that the RIO of the twolevel OFA be set to 1:1 when using radial air staging in a coal-fired boiler. The results provide new insights into the application of the air staging method for efficient and clean PC utilization.