Optimising the drilling process parameters of Kevlar-epoxy composite material using the experimental design-based goal programming approach

被引:1
作者
Ic, Yusuf Tansel [1 ]
Kara, Imdat [1 ]
机构
[1] Baskent Univ, Dept Ind Engn, TR-06790 Ankara, Turkiye
关键词
Kevlar-epoxy composite material; delamination; experimental design; surface roughness; goal programming; factorial design; drilling; optimisation; COMPREHENSIVE ANALYSIS; THRUST FORCE; DELAMINATION;
D O I
10.1504/IJMPT.2023.128787
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this study, we present an experimental design-based goal programming approach to determine the optimum values of the cutting parameters in the drilling process of Kevlar-epoxy composite material. As a result of the experiments, we measured the surface roughness and delamination factor of the drilling hole. We obtained the regression functions for surface roughness and delamination using the 2(k) factorial design approach. Then, the cutting parameter values that will optimise the delamination and surface roughness were found with the goal programming method. The difference between the presented study and the published studies in the literature is that it proposes an integrated experimental design and goal programming approaches to find the optimal parameter values for different target values to minimise surface roughness and delamination at the same time. We have concluded that the proposed method is suitable considering different goal values for obtaining the optimum drilling parameters.
引用
收藏
页码:193 / 208
页数:17
相关论文
共 26 条
[1]   VIBRATIONS OF BELTS AND BELT DRIVES [J].
ABRATE, S .
MECHANISM AND MACHINE THEORY, 1992, 27 (06) :645-659
[2]   The effect of vibratory drilling on hole quality in polymeric composites [J].
Arul, S ;
Vijayaraghavan, L ;
Malhotra, SK ;
Krishnamurthy, R .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (3-4) :252-259
[3]   Defects in the Kevlar-epoxy thin layer sheet drilling with different machining strategies [J].
Baharlooey, Dariush ;
Abootorabi, Mohammad Mahdi .
POLYMERS & POLYMER COMPOSITES, 2021, 29 (07) :909-918
[4]   Assessment of cutting performance on drilling with different drilling methods of fiber reinforced polymer composites: A Literature Review [J].
Bayraktar, Senol .
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2018, 33 (02) :609-626
[5]   A study of hole drilling in Kevlar composites [J].
Bhattacharyya, D ;
Horrigan, DPW .
COMPOSITES SCIENCE AND TECHNOLOGY, 1998, 58 (02) :267-283
[6]   OPTIMAL ESTIMATION OF EXECUTIVE COMPENSATION BY LINEAR PROGRAMMING [J].
Charnes, A. ;
Cooper, W. W. ;
Ferguson, R. O. .
MANAGEMENT SCIENCE, 1955, 1 (02) :138-151
[7]  
Charnes A., 1961, MANAGEMENT MODELS IN
[8]   Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites: a comprehensive analysis of machining-induced damage responses [J].
Dhakal, Hom Nath ;
Ismail, Sikiru Oluwarotimi ;
Ojo, Saheed Olalekan ;
Paggi, Marco ;
Smith, James R. .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 99 (9-12) :2833-2847
[9]  
Gnanasekaran S., 2016, S ASIAN J ENG TECHNO, V2, P156
[10]   Comprehensive analysis of delamination in drilling of composite materials with various drill bits [J].
Hocheng, H ;
Tsao, CC .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 140 :335-339