High-temperature microstructural stability of pure Ni fabricated by laser powder bed fusion using Gaussian and flat-top beam profiles

被引:16
作者
Jodi, Dennis Edgard [1 ,2 ]
Kitashima, Tomonori [1 ,3 ]
Singh, Alok [1 ]
Watanabe, Makoto [1 ]
机构
[1] Natl Inst Mat Sci, Res Ctr Struct Mat, 1-2-1 Sengen, Tsukuba, Ibaraki 3050047, Japan
[2] Kyushu Univ, Dept Mat Phys & Chem, Nishi Ku, 744 Motooka, Fukuoka, Fukuoka 8190395, Japan
[3] Kyushu Univ, Dept Mat, Nishi Ku, 744 Motooka, Fukuoka, Fukuoka 8190395, Japan
基金
日本科学技术振兴机构;
关键词
Metals and alloys; Laser processing; Dislocations; Microstructure; INCIDENTAL DISLOCATION BOUNDARIES; EVOLUTION; RECRYSTALLIZATION; CHARACTER; DENSITIES; ORIGIN; EBSD;
D O I
10.1016/j.matchar.2023.112897
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effects of annealing on the microstructure of pure Ni fabricated by laser powder bed fusion (LPBF) were investigated using two different beam profiles: Gaussian and flat-top. The dislocations in the as-fabricated samples were predominantly arranged as statistically stored dislocations, and the low driving force resulting from the insufficient accumulation of geometrically necessary dislocations (GNDs) in the as-fabricated specimens caused minimal static recrystallization in the as-annealed specimens, despite the high dislocation density in the as-fabricated samples, particularly the Gaussian-LPBF-derived specimens. However, static recovery occurred in both the Gaussian-LPBF and flat-top-LPBF-derived specimens, with the higher number of GNDs in the former specimens causing a more prominent misorientation of dislocation boundaries than in the latter. Furthermore, migration of high-angle grain boundaries (HAGBs; misorientation >15 degrees) was not observed because of the insufficient strain gradient and the distribution of HAGBs in low-energy regions.
引用
收藏
页数:16
相关论文
共 53 条
[1]  
Aboulkhair NT., 2014, Addit Manuf, V1, P77, DOI DOI 10.1016/J.ADDMA.2014.08.001
[2]   Recrystallization kinetics, mechanisms, and topology in alloys processed by laser powder-bed fusion: AISI 316L stainless steel as example [J].
Aota, Leonardo Shoji ;
Bajaj, Priyanshu ;
Zilnyk, Kahl Dick ;
Jaegle, Eric Aime ;
Ponge, Dirk ;
Sandim, Hugo Ricardo Zschommler ;
Raabe, Dierk .
MATERIALIA, 2021, 20
[3]   Characterization of Recrystallization and Second-Phase Particles in Solution-Treated Additively Manufactured Alloy 718 [J].
Ariaseta, Achmad ;
Kobayashi, Satoru ;
Takeyama, Masao ;
Wang, Yuting ;
Imano, Shinya .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (02) :973-981
[4]   Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density [J].
Arsenlis, A ;
Parks, DM .
ACTA MATERIALIA, 1999, 47 (05) :1597-1611
[5]   Epitaxy and Microstructure Evolution in Metal Additive Manufacturing [J].
Basak, Amrita ;
Das, Suman .
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46, 2016, 46 :125-149
[6]  
Beausir B., Analysis Tools for Electron and X-ray diffraction. ATEX-software
[7]   Printability, mechanical and degradation properties of Mg-(x)Zn elemental powder mixes processed by laser powder bed fusion [J].
Benn, Felix ;
D'Elia, Francesco ;
van Gaalen, Kerstin ;
Li, Muzi ;
Malinov, Savko ;
Kopp, Alexander .
ADDITIVE MANUFACTURING LETTERS, 2022, 2
[8]   Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L [J].
Bertsch, K. M. ;
de Bellefon, G. Meric ;
Kuehl, B. ;
Thoma, D. J. .
ACTA MATERIALIA, 2020, 199 (199) :19-33
[9]   Grain boundary velocity and curvature are not correlated in Ni polycrystals [J].
Bhattacharya, Aditi ;
Shen, Yu-Feng ;
Hefferan, Christopher M. ;
Li, Shiu Fai ;
Lind, Jonathan ;
Suter, Robert M. ;
Krill, Carl E., III ;
Rohrer, Gregory S. .
SCIENCE, 2021, 374 (6564) :189-+
[10]   Grain boundary energy function for fcc metals [J].
Bulatov, Vasily V. ;
Reed, Bryan W. ;
Kumar, Mukul .
ACTA MATERIALIA, 2014, 65 :161-175