Physical properties of the mixture polylactide/thermoplastic starch

被引：4

作者：

Fabijanski, Mariusz ^{[1
]}

Garbarski, Jacek ^{[1
]}

机构：

[1] Warsaw Univ Sci & Technol, Zakladzie Przetworstwa Tworzyw Sztucznych, Wydziale Mech Technol, Warsaw, Poland

来源：

PRZEMYSL CHEMICZNY | 2023年 / 102卷 / 09期

关键词：

PLA; TPS; polymer blends; mechanical properties; water absorption; MECHANICAL-PROPERTIES; NANOCOMPOSITES; BLENDS; POLYLACTIDE; MORPHOLOGY; STRENGTH; FILMS; PLA;

D O I：

10.15199/62.2023.9.14

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

Polylactide (PLA) and thermoplastic starch (TPS) granules in mass proportions of 25, 50, 75% were mixed in a drum mixer, and then meltmixed and shaped using a screw injection molding machine. Polymer samples were analyzed for impact strength, hardness and water absorption. The PLA/TPS mixts. showed a significantly higher impact strength than each of the component materials separately. The impact strenght was even twice as high, which indicated the occurrence of the synergism phenomenon.

引用

页码：954 / 958

页数：5

共 50 条

[21] EFFECT OF "CORE-SHELL" POLYMERIC NANOFILLER ON THE STRUCTURE AND PROPERTIES OF POLYLACTIDE AND THERMOPLASTIC CORN STARCH BLEND
Jeziorska, Regina
Szadkowska, Agnieszka
Swierz-Motysia, Barbara
Kozakiewicz, Janusz
POLIMERY, 2012, 57 (05) : 354 - 363
[22] Ductility and Toughness Improvement of Injection-Molded Compostable Pieces of Polylactide by Melt Blending with Poly(ε-caprolactone) and Thermoplastic Starch
Quiles-Carrillo, Luis
Montanes, Nestor
Pineiro, Fede
Jorda-Vilaplana, Amparo
Torres-Giner, Sergio
MATERIALS, 2018, 11 (11)
[23] Biodegradability of blends based on aliphatic polyester and thermoplastic starch
Bulatovic, Vesna Ocelic
Grgic, Dajana Kucic
Slouf, Miroslav
Ostafinska, Aleksandra
Dybal, Jiri
Jozinovic, Antun
CHEMICAL PAPERS, 2019, 73 (05): : 1121 - 1134
[24] Loss of thermoplastic elastomer toughening in polylactide after weathering
Meyva-Zeybek, Y.
Kaynak, C.
JOURNAL OF APPLIED POLYMER SCIENCE, 2019, 136 (11)
[25] Toughening polylactide with polyether-block-amide and thermoplastic starch acetate: Influence of starch esterification degree
Zhou, Linyao
Zhao, Guiyan
Feng, Yulin
Yin, Jinghua
Jiang, Wei
CARBOHYDRATE POLYMERS, 2015, 127 : 79 - 85
[26] Tailoring flexibility and dispersity of thermoplastic starch gel by controlling intermolecular structure for improving folding endurance of polylactide
Si, Wanjie
Zhang, Shuidong
He, Yan
Chen, Yu-Kun
EUROPEAN POLYMER JOURNAL, 2021, 159
[27] Mechanical, Physical and Thermal Properties of Sugar Palm Nanocellulose Reinforced Thermoplastic Starch (TPS)/Poly (Lactic Acid) (PLA) Blend Bionanocomposites
Nazrin, A.
Sapuan, S. M.
Zuhri, M. Y. M.
POLYMERS, 2020, 12 (10) : 1 - 18
[28] Humidity-Activated Shape Memory Effects on Thermoplastic Starch/EVA Blends and Their Compatibilized Nanocomposites
Sessini, Valentina
Raquez, Jean-Marie
Lourdin, Denis
Maigret, Jean-Eudes
Kenny, Jose Maria
Dubois, Philippe
Peponi, Laura
MACROMOLECULAR CHEMISTRY AND PHYSICS, 2017, 218 (24)
[29] Effect of Starch Nanocrystals on the Properties of Low Density Polyethylene/Thermoplastic Starch Blends
Chaoui, Saliha
Smail, Dalila
Hellati, Abdelhak
Benachour, Djafer
ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, 2020, 10 (04) : 5875 - 5881
[30] Improving the mechanical properties of thermoplastic starch/poly(vinyl alcohol)/clay nanocomposites
Majdzadeh-Ardakani, K.
Nazari, B.
COMPOSITES SCIENCE AND TECHNOLOGY, 2010, 70 (10) : 1557 - 1563

← 1 2 3 4 5 →