A novel diarylethene-based fluorescence sensor for Zn2+detection and its application

A series of fluorometric sensors of Zn2+ have been synthesized due to the significant function of Zn2+ in the human body and environment. However, most of probes reported for detecting Zn2+ have high detection limit or low sensitivity. In this paper, an original Zn2+ sensor, namely 1o, was synthesized by diarylethene and 2-aminobenzamide. When Zn2+ was added, the fluorescence intensity of 1o increased by 11 times within 10 s, along with a fluorescence color change from dark to bright blue, and the detection limit (LOD) was calculated to be 0.329 & mu;M. According to Job's plot curves, the binding mode of 1o and Zn2+ was measured as 1:1, which was further proved by 1H NMR spectra, HRMS and FT-IR spectra. The logic circuit was designed to take advantage of the fact that the fluorescence intensity of 1o can be controlled by Zn2+, EDTA, UV and Vis. In addition, Zn2+ in actual water samples were tested, in which the recovery rate of Zn2+ was between 96.5 % and 109 %. Furthermore, 1o was successfully made into a fluorescent test strip, which could be used to detect Zn2+ in the environment economically and conveniently.