Changes in Hole and Electron Injection under Electrical Stress and the Rapid Electroluminescence Loss in Blue Quantum-Dot Light-Emitting Devices

Blue quantum dot light-emitting devices (QLEDs) suffer from fast electroluminescence (EL) loss when under electrical bias. Here, it is identified that the fast EL loss in blue QLEDs is not due to a deterioration in the photoluminescence quantum yield of the quantum dots (QDs), contrary to what is commonly believed, but rather arises primarily from changes in charge injection overtime under the bias that leads to a deterioration in charge balance. Measurements on hole-only and electron-only devices show that hole injection into blue QDs increases over time whereas electron injection decreases. Results also show that the changes are associated with changes in hole and electron trap densities. The results are further verified using QLEDs with blue and red QDs combinations, capacitance versus voltage, and versus time characteristics of the blue QLEDs. The changes in charge injection are also observed to be partially reversible, and therefore using pulsed current instead of constant current bias for driving the blue QLEDs leads to an almost 2.5x longer lifetime at the same initial luminance. This work systematically investigates the origin of blue QLEDs EL loss and provides insights for designing improved blue QDs paving the way for QLEDs technology commercialization. The fast EL loss in blue QLEDs is not due to a deterioration in the photoluminescence quantum yield of the quantum dots (QDs) but rather arises from charge injection changes overtime under the bias that leads to a deterioration in charge balance. Measurements on hole-only and electron-only devices show that hole injection into blue QDs increases whereas electron injection decreases.image