Effect of hot water, ultrasound, microwave, and pectinase-assisted extraction of anthocyanins from black goji berry for food application

Lycium ruthenicum, commonly known as black goji berry, is a rich anthocyanin source containing a high amount of monoacylated anthocyanins. This study investigates the effect of different extraction methods to extract anthocyanins from black goji berry for food application. Different hot water extraction conditions were applied to investigate the effect of specific substrate: solvent ratio (1:15 and 1:20 (w/v)), extraction time (30 and 60 min) and extraction temperature (40, 50 and 60 degrees C) on the extraction yield, total anthocyanin content (TAC) and the total phenolic content (TPC) of the anthocyanin extracts. Best hot water extraction conditions for obtaining an antho-cyanin extract with high TAC (13.8 +/- 1.14 mg CGE/g), TPC (69.7 +/- 2.50 mg of GAE/g), and extraction yield (48.3 +/- 3.25%) consuming less solvent, time and heat were substrate: solvent ratio of 1: 15 (w/v), extraction temperature of 50 degrees C, and extraction time of 30 min. The effect of pectinase, ultrasound, and microwave on hot water extraction of anthocyanins from black goji berry was investigated using the best conditions for hot water extraction. Pectinase-assisted extraction [1.5% (w/v) pectinase, substrate: solvent ratio of 1:15 (w/v) at 50 degrees C for 30 min] was the best extraction method to extract black goji berry anthocyanins demonstrating higher extraction yield, TAC, TPC, and the highest percentage of petunidin-3-O-(trans-p-coumaroyl)-rutinoside-5-O-glucoside.