Flow and thermal performance of a multi-jet twisted square microchannel heat sink using CuO-water nanofluid

被引:28
作者
Tan, Zhiming [1 ,2 ]
Jin, Puhang [2 ,4 ]
Zhang, Yingchun [1 ]
Xie, Gongnan [2 ,3 ,4 ]
机构
[1] Northwestern Polytech Univ, Sch Marine Sci & Technol, Xian 710072, Peoples R China
[2] Northwestern Polytech Univ, Ocean Inst, Taicang 215400, Peoples R China
[3] Res & Dev Inst Northwestern Polytech Univ Shenzhen, Shenzhen 518057, Peoples R China
[4] Northwestern Polytech Univ, Sch Marine Sci & Technol, POB 24, Xian 710072, Peoples R China
关键词
Microchannel heat sink; Twisted square channel; Torsion angle; Jet impingement; FLUID-FLOW;
D O I
10.1016/j.applthermaleng.2023.120133
中图分类号
O414.1 [热力学];
学科分类号
摘要
Due to the rapid development in micro manufacturing and 3D printing technology, the complex shape of microchannel heat sink (MCHS) can be realized, instead of just the traditional rectangular channels. It is recognized that twisted square channels which are similar to a kind of internal thread channel have favorable effects on heat transfer because of its enhancement of turbulence intensity. In this work, a geometry of twisted tube is applied to the microchannel and the thermal and hydrodynamic performance of twisted square microchannels with jet impingement are investigated. The arrangement of the jet channels is the research focus and one-jet and multi-jet microchannel heat sinks are compared by discussing the temperature profile, pressure drop and heat transfer characteristics. By applying the twisted geometry to the microchannel, the Nusselt number can be increased by 16.48% with little increase in pressure drop. However, with the increase in torsion angle of the twisted microchannel (from 90 degrees to 720 degrees), the thermal performance changes little for the limited effect on the temperature uniformity of the cross section. Integration of jet impingement further improves the thermalhydrodynamic performance of MCHS. Specifically, the thermal resistance of MCHS was reduced by 41% at most. Finally, by comparing the comprehensive performance of the cases with varied jet arrangement, it is concluded that jets distributed at the cross section with the torsion angle of 45 degrees, 135 degrees, and 225 degrees can induce better performance. The present investigation combines the twisted geometry and jet impingement into microchannel, quantitatively characterizes the performance of MCHS and gives the guidance for the jet arrangement design.
引用
收藏
页数:11
相关论文
共 32 条
[1]   Thermo-hydraulic performance of a circular microchannel heat sink using swirl flow and nanofluid [J].
Ali, Abdullah Masoud ;
Rona, Aldo ;
Kadhim, Hakim T. ;
Angelino, Matteo ;
Gao, Shian .
APPLIED THERMAL ENGINEERING, 2021, 191
[2]   Thermo-hydraulic performance of wavy microchannel heat sink with oblique grooved finned [J].
Alihosseini, Yousef ;
Targhi, Mohammad Zabetian ;
Heyhat, Mohammad Mahdi .
APPLIED THERMAL ENGINEERING, 2021, 189
[3]   Experimental and numerical study of fluid flow and heat transfer in a twisted square duct [J].
Bhadouriya, Rambir ;
Agrawal, Amit ;
Prabhu, S. V. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 82 :143-158
[4]   On the nanofluids applications in microchannels: A comprehensive review [J].
Chamkha, Ali J. ;
Molana, Maysam ;
Rahnama, Ali ;
Ghadami, Farid .
POWDER TECHNOLOGY, 2018, 332 :287-322
[5]   Numerical study of heat transfer and flow characteristic of twisted tube with different cross section shapes [J].
Cheng, Junlin ;
Qian, Zuoqin ;
Wang, Qiang ;
Fei, Chunguang ;
Huang, Weilong .
HEAT AND MASS TRANSFER, 2019, 55 (03) :823-844
[6]  
Choi S.U., 1995 INT MECH ENG C
[7]   Numerical investigations of heat transfer in hybrid microchannel heat sink with multi-jet impinging and trapezoidal fins [J].
Gao, W. ;
Zhang, J. F. ;
Qu, Z. G. ;
Tao, W. Q. .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2021, 164
[8]   Thermal performance and structure optimization for slotted microchannel heat sink [J].
Huang, Shanbo ;
Zhao, Jin ;
Gong, Liang ;
Duan, Xinyue .
APPLIED THERMAL ENGINEERING, 2017, 115 :1266-1276
[9]   Numerical investigation of several twisted tubes with non-conventional tube cross sections on heat transfer and pressure drop [J].
Indurain, B. ;
Uystepruyst, D. ;
Beaubert, F. ;
Lalot, S. ;
Helgadottir, A. .
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2020, 140 (03) :1555-1568
[10]   Thermal Characteristics of Staggered Double-Layer Microchannel Heat Sink [J].
Jing, Dalei ;
He, Lei .
ENTROPY, 2018, 20 (07)