Physics-based models, surrogate models and experimental assessment of the vehicle-bridge interaction in braking conditions

被引:19
作者
Aloisio, Angelo [1 ]
Contento, Alessandro [2 ]
Alaggio, Rocco [1 ]
Quaranta, Giuseppe [3 ]
机构
[1] Univ Laquila, Dept Civil Construct Architecture & Environm Engn, Laquila, Italy
[2] Fuzhou Univ, Coll Civil Engn, Fuzhou, Peoples R China
[3] Sapienza Univ Rome, Dept Struct & Geotech Engn, Rome, Italy
关键词
Bouncing; Braking; Bridge; Fragility curve; Genetic programming; Machine learning; Moving load; Neural network; Pitching; Roughness; Surrogate model; Vehicle-bridge interaction; MOVING FORCE IDENTIFICATION; ROAD SURFACE-ROUGHNESS; DYNAMIC-ANALYSIS; VIBRATION; BEHAVIOR; ALGORITHM; ELEMENT; SYSTEM;
D O I
10.1016/j.ymssp.2023.110276
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The dynamics of roadway bridges crossed by vehicles moving at variable speed has attracted far less attention than that generated by vehicles travelling at constant velocity. Consequently, the role of some parameters and the combination thereof, as well as influence and accuracy of the modelling strategies, are not fully understood yet. Therefore, a large statistical analysis is performed in the present study to provide novel insights into the dynamic vehicle-bridge interaction (VBI) in braking conditions. To this end, an existing mid-span prestressed concrete bridge is selected as case study. First, several numerical simulations are performed considering alternative vehicle models (i.e., single and two degrees-of-freedom models) and different braking scenarios (i.e., soft and hard braking conditions, with both stationary and nonstationary road roughness models in case of soft braking). The statistical appraisal of the obtained results unfolds some effects of the dynamic VBI modelling in braking conditions that have not been reported in previous studies. Additionally, the use of machine learning techniques is explored for the first time to develop surrogate models able to predict the effect of the dynamic VBI in braking conditions efficiently. These surrogate models are then employed to obtain the fragility curve for the selected prestressed concrete bridge, where the attainment of the decompression moment is considered as relevant limit state. Whilst the derivation of the fragility curve using numerical simulations turned out to be almost unpractical using standard computational resources, the proposed approach that exploits surrogate models carried out via machine learning techniques was demonstrated accurate despite the dramatic reduction of the total elaboration time. Finally, the accuracy of the numerical (physics-based and surrogate) models is evaluated on a statistical basis through comparisons with experimental data.
引用
收藏
页数:29
相关论文
共 111 条
[1]   Analysis of energy harvesters for highway bridges [J].
Ali, S. F. ;
Friswell, M. I. ;
Adhikari, S. .
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2011, 22 (16) :1929-1938
[2]   Bending Stiffness Identification of Simply Supported Girders using an Instrumented Vehicle: Full Scale Tests, Sensitivity Analysis, and Discussion [J].
Aloisio, Angelo ;
Alaggio, Rocco ;
Fragiacomo, Massimo .
JOURNAL OF BRIDGE ENGINEERING, 2021, 26 (01)
[3]   Dynamic identification and model updating of full-scale concrete box girders based on the experimental torsional response [J].
Aloisio, Angelo ;
Alaggio, Rocco ;
Fragiacomo, Massimo .
CONSTRUCTION AND BUILDING MATERIALS, 2020, 264
[4]   Bayesian estimate of the elastic modulus of concrete box girders from dynamic identification: a statistical framework for the A24 motorway in Italy [J].
Aloisio, Angelo ;
Pasca, Dag Pasquale ;
Alaggio, Rocco ;
Fragiacomo, Massimo .
STRUCTURE AND INFRASTRUCTURE ENGINEERING, 2021, 17 (12) :1626-1638
[5]   Time-domain identification of the elastic modulus of simply supported box girders under moving loads: Method and full-scale validation [J].
Aloisio, Angelo ;
Alaggio, Rocco ;
Fragiacomo, Massimo .
ENGINEERING STRUCTURES, 2020, 215
[6]  
[Anonymous], 2004, EN 1992-1-2: Eurocode 2: Design of Concrete Structures - Part 1-2: General Rules - Structural Fire Design
[7]  
[Anonymous], 2018, Decreto 17 gennaio 2018: Aggiornamento delle Norme tecniche per le costruzioni
[8]  
[Anonymous], 1995, M VIBR SSS MEAS E ME, V8608
[9]  
Astrom K. J., 2013, Computer-Controlled Systems: Theory and Design
[10]   A numerical element for vehicle-bridge interaction analysis of vehicles experiencing sudden deceleration [J].
Azimi, Hossein ;
Galal, Khaled ;
Pekau, Oscar A. .
ENGINEERING STRUCTURES, 2013, 49 :792-805