Improving the wear resistance and mechanical properties of hybridized AZ80 Mg/CeO2+ZrO2 surface composite by friction stir processing: Effect of pin geometry

被引：16

作者：

Ma, Wenming ^{[1
]}

Paidar, Moslem ^{[2
]}

Ojo, Olatunji Oladimeji ^{[3
]}

Mehrez, Sadok ^{[4
,5
]}

Zain, Azlan Mohd ^{[6
]}

Kulandaivel, Arul ^{[7
]}

Mohanavel, V. ^{[8
,9
,10
]}

Kannan, Sathish

机构：

[1] Xijing Univ, Sch Mech Engn, Xian 710123, Shaanxi, Peoples R China

[2] Fed Univ Technol Akure, Dept Ind & Prod Engn, Akure, Nigeria

[3] Islamic Azad Univ, Dept Mat Engn, South Tehran Branch, Tehran 1459853849, Iran

[4] Prince Sattam bin Abdulaziz Univ, Coll Engn Al Kharj, Dept Mech Engn, Al Kharj 11942, Saudi Arabia

[5] Univ Tunis El Manar, Dept Mech Engn, ENIT, BP 37, Tunis 1002, Tunisia

[6] Univ Teknol Malaysia, Fac Comp, Skudai 81310, Johor, Malaysia

[7] Agni Coll Technol, Dept Mech Engn, Chennai 600130, India

[8] Bharath Inst Higher Educ & Res, Ctr Mat Engn & Regenerat Med, Chennai 600073, Tamil Nadu, India

[9] Chandigarh Univ, Dept Mech Engn, Mohali 140413, Punjab, India

[10] Glocal Univ, Sch Technol, Dept Mech Engn, Delhi Yamunotri Marg, Saharanpur 247121, Uttar Pradesh, India

来源：

VACUUM | 2023年 / 212卷

关键词：

AZ80 Mg magnesium; Cerium oxide; Zirconium dioxide; Friction stir processing; Hybrid composite; Shear punching strength; MICROSTRUCTURE; PROFILE;

D O I：

10.1016/j.vacuum.2023.111980

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Geometrically modified pins were utilized for the development of the hybrid AZ80 Mg/CeO2+ZrO2 composite by using the friction stir processing method. The local shear punching strength, structure, hardness, and wear of the hybrid AZ80 Mg/CeO2+ZrO2 composite were investigated. A change of the tool profile from cylindrical to conical pin profile eliminates particle clusters and inherent voids while the nugget shape, vortex width, and surface flash are also affected due to the tool's volumetric difference. Microstructural changes (grain and particle sizes) are also positively improved by the tapered pin tool, and these have about 24% improvement on the local shear strength of the composite while the hardness and the wear performances of the composite are also improved.

引用

页数：8

共 50 条

[41] Investigation on effects of traverse speed and number of passes on mechanical and abrasive properties of AA7075-T6/ZrO2 surface nanocomposite produced using friction stir processing
Jamali, Amir
Mirsalehi, Seyyed Ehsan
WELDING IN THE WORLD, 2022, 66 (11) : 2297 - 2313
[42] Comparison of Mixing Strategies and Hybrid Ratio Optimization for Mechanical Properties Enhancement of Al-CeO2-GNP’s Metal Matrix Composite Fabricated by Friction Stir Processing
Basit Yaqoob
Riffat Asim Pasha
Mokhtar Awang
Muhammad Ali Nasir
Azhar Hussain
Kamran Nazir
Metallography, Microstructure, and Analysis, 2019, 8 : 534 - 544
[43] Effect of single and double pass friction stir processing on microhardness and wear properties of AA5083/Al2O3 surface composites
Patel, Kevin
Ghetiya, Nilesh D.
Bharti, Shalok
MATERIALS TODAY-PROCEEDINGS, 2022, 57 : 38 - 43
[44] Development of Cu-TiO2 surface nanocomposite by friction stir processing: Effect of pass number on microstructure, mechanical properties, tribological and corrosion behavior
Heidarpour, Akbar
Mazaheri, Yousef
Roknian, Masoud
Ghasemi, Samad
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 783 : 886 - 897
[45] Effect of Processing Parameters on Microstructure and Mechanical Properties of an Al-Al11Ce3-Al2O3In-Situ Composite Produced by Friction Stir Processing
C.F. Chen
P.W. Kao
L.W. Chang
N.J. Ho
Metallurgical and Materials Transactions A, 2010, 41 : 513 - 522
[46] Effect of friction stir processing parameters on the properties of AA7075-T73/Al2O3 surface metal matrix composite
Al-Helli A.H.
Al-Hamaoy A.R.
Takhakh A.M.
Al-Hamaoy, Ahmed R. (meclaser80@gmail.com), 1600, Trans Tech Publications Ltd (1002): : 140 - 150
[47] Investigation on effects of traverse speed and number of passes on mechanical and abrasive properties of AA7075-T6/ZrO2 surface nanocomposite produced using friction stir processing
Amir Jamali
Seyyed Ehsan Mirsalehi
Welding in the World, 2022, 66 : 2297 - 2313
[48] Mechanical properties and tribological performance of A356/Cr3C2-NiCr surface composite developed by high-velocity oxy-fuel and post friction stir processing treatment
Mazaheri, Yousef
Malmir, Reza
Jalilvand, Mohammad Mahdi
Sheikhi, Mohsen
Heidarpour, Akbar
SURFACES AND INTERFACES, 2022, 28
[49] Influence of reinforcements (SiC and Al2O3) and rotational speed on wear and mechanical properties of aluminum alloy 6061-T6 based surface hybrid composites produced via friction stir processing
Devaraju, A.
Kumar, A.
Kumaraswamy, A.
Kotiveerachari, B.
MATERIALS & DESIGN, 2013, 51 : 331 - 341
[50] Role of hybrid ratio in microstructural, mechanical and sliding wear properties of the Al5083/Graphitep/Al2O3p a surface hybrid nanocomposite fabricated via friction stir processing method
Asl, A. Mostafapour
Khandani, S. T.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 559 : 549 - 557

← 1 2 3 4 5 →