Improving the wear resistance and mechanical properties of hybridized AZ80 Mg/CeO2+ZrO2 surface composite by friction stir processing: Effect of pin geometry

被引：16
作者：
Ma, Wenming [1 ]
Paidar, Moslem [2 ]
Ojo, Olatunji Oladimeji [3 ]
Mehrez, Sadok [4 ,5 ]
Zain, Azlan Mohd [6 ]
Kulandaivel, Arul [7 ]
Mohanavel, V. [8 ,9 ,10 ]
Kannan, Sathish
机构：
[1] Xijing Univ, Sch Mech Engn, Xian 710123, Shaanxi, Peoples R China
[2] Fed Univ Technol Akure, Dept Ind & Prod Engn, Akure, Nigeria
[3] Islamic Azad Univ, Dept Mat Engn, South Tehran Branch, Tehran 1459853849, Iran
[4] Prince Sattam bin Abdulaziz Univ, Coll Engn Al Kharj, Dept Mech Engn, Al Kharj 11942, Saudi Arabia
[5] Univ Tunis El Manar, Dept Mech Engn, ENIT, BP 37, Tunis 1002, Tunisia
[6] Univ Teknol Malaysia, Fac Comp, Skudai 81310, Johor, Malaysia
[7] Agni Coll Technol, Dept Mech Engn, Chennai 600130, India
[8] Bharath Inst Higher Educ & Res, Ctr Mat Engn & Regenerat Med, Chennai 600073, Tamil Nadu, India
[9] Chandigarh Univ, Dept Mech Engn, Mohali 140413, Punjab, India
[10] Glocal Univ, Sch Technol, Dept Mech Engn, Delhi Yamunotri Marg, Saharanpur 247121, Uttar Pradesh, India
来源：
VACUUM | 2023年 / 212卷
关键词：
AZ80 Mg magnesium; Cerium oxide; Zirconium dioxide; Friction stir processing; Hybrid composite; Shear punching strength; MICROSTRUCTURE; PROFILE;
D O I：
10.1016/j.vacuum.2023.111980
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Geometrically modified pins were utilized for the development of the hybrid AZ80 Mg/CeO2+ZrO2 composite by using the friction stir processing method. The local shear punching strength, structure, hardness, and wear of the hybrid AZ80 Mg/CeO2+ZrO2 composite were investigated. A change of the tool profile from cylindrical to conical pin profile eliminates particle clusters and inherent voids while the nugget shape, vortex width, and surface flash are also affected due to the tool's volumetric difference. Microstructural changes (grain and particle sizes) are also positively improved by the tapered pin tool, and these have about 24% improvement on the local shear strength of the composite while the hardness and the wear performances of the composite are also improved.
引用
收藏
页数：8
相关论文
共 50 条
  • [31] Production of AA7075/ZrO2 nanocomposite using friction stir processing: Metallurgical structure, mechanical properties and wear behavior
    Jamali, Amir
    Mirsalehi, Seyyed Ehsan
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2022, 37 : 55 - 69
  • [32] Influence of Texture Evolution on Mechanical and Damping Properties of SiC/Li2ZrO3/Al Composite Through Friction Stir Processing
    Singh, Subhash
    Pal, Kaushik
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2020, 142 (02):
  • [33] Mechanical, Wear, and Corrosion Properties Investigation of ZE41/TiB2 Surface Composites Fabricated by Friction Stir Processing
    Manroo, Suhail Ahmed
    Khan, Noor Zaman
    Ahmad, Babar
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2022, 144 (11):
  • [34] Effect of friction stir processing pass sequence on properties of Mg-ZrSiO4-Al2O3 surface hybrid micro/nano-composites
    Sharifitabar, M.
    Kashefi, M.
    Khorshahian, S.
    MATERIALS & DESIGN, 2016, 108 : 1 - 7
  • [35] Improving the mechanical properties and electrical conductivity of cold-sprayed Cu-Ti3SiC2 composite by friction stir processing
    Yang, Zhibin
    Wang, Jinming
    Li, Xingchao
    Wang, Yandong
    Ni, Dingrui
    Zhang, Xintao
    Xu, Jingjun
    Li, Meishuan
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2023, 173
  • [36] Comparison of Mixing Strategies and Hybrid Ratio Optimization for Mechanical Properties Enhancement of Al-CeO2-GNP's Metal Matrix Composite Fabricated by Friction Stir Processing
    Yaqoob, Basit
    Pasha, Riffat Asim
    Awang, Mokhtar
    Nasir, Muhammad Ali
    Hussain, Azhar
    Nazir, Kamran
    METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2019, 8 (04) : 534 - 544
  • [37] Effect of Tool Pin Profile on the Microstructure and Tribological Properties of Friction Stir Processed Al-20 wt% Mg2Si Composite
    Moharrami, A.
    Razaghian, A.
    Emamy, M.
    Taghiabadi, R.
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2019, 141 (12):
  • [38] Effect of tool pin profile on the microstructure and mechanical properties of friction stir processed Al6061/Al2O3-TiB2 surface hybrid composite layer
    Khojastehnezhad, Vahid M.
    Pourasl, Hamed H.
    Barenji, Reza Vatankhah
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2019, 233 (05) : 900 - 912
  • [39] Fabrication of novel AZ31/CeO2+h-BN hybrid surface composites using friction stir processing: Study of microstructural, tribological and mechanical behavior
    Zhao, Jinguo
    Keshavarz, Hossein
    Paidar, Moslem
    Alamri, Sagr
    Shomurotova, Shirin
    Mohammed, Khidhair Jasim
    VACUUM, 2025, 234
  • [40] Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing
    Shafiei-Zarghani, A.
    Kashani-Bozorg, S. F.
    Zarei-Hanzaki, A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 500 (1-2): : 84 - 91
12345