Natural Aging of Aluminum Alloy 2024 After Severe Plastic Deformation

被引：16

作者：

Volokitina, Irina ^{[1
]}

Bychkov, Andrey ^{[2
]}

Volokitin, Andrey ^{[3
]}

Kolesnikov, Alexandr ^{[4
]}

机构：

[1] Rudny Ind Inst, 50 Let Oktyabrya Str 38, Rudny 111500, Kazakhstan

[2] Lomonosov Moscow State Univ, Leninskie Gory GSP 1, Moscow 119234, Russia

[3] Karaganda Ind Univ, Republ Ave 30, Temirtau 101400, Kazakhstan

[4] M Auezov South Kazakhstan Univ, Ave Tauke Khan,5, Shymkent 160012, Kazakhstan

来源：

METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS | 2023年 / 12卷 / 03期

关键词：

Aluminum alloy; Severe plastic deformation; High-pressure torsion; Microstructure; Aging;

D O I：

10.1007/s13632-023-00966-y

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

This paper provides a laboratory-level evaluation of the cryogenic strain potential of aluminum alloy 2024 after severe plastic deformation by equal channel angular pressing method. Characteristics of the samples were determined by transmission electron microscopy, tensile tests and microhardness determination. Natural aging at room temperature for 24 days resulted in a change in the microhardness of aluminum samples. Thus, in samples strained at room temperature, the decrease in microhardness occurs by 250 MPa and in samples strained at a cryogenic temperature by 110 MPa. This can be explained by return processes which improve the characteristics of plasticity. As a result, a thermo-mechanical treatment mode was developed for aluminum alloy, including quenching, straining by equal channel angular pressing at liquid nitrogen temperature, followed by natural aging, which allows to obtain samples with certain parameters of structural strength of the alloy.

引用

页码：564 / 566

页数：3

共 50 条

[41] Precipitation hardening of 2024-T3 aluminum alloy during creep aging
Lin, Y. C.
Xia, Yu-Chi
Jiang, Yu-Qiang
Zhou, Hua-Min
Li, Lei-Ting
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 565 : 420 - 429
[42] Enhancement of Creep Lifetime of Aluminum through Severe Plastic Deformation
Kral, Petr
Dvorak, Jiri
Kvapilova, Marie
Kadomtsev, Andrej G.
Sklenicka, Vaclav
CRYSTALS, 2024, 14 (03)
[43] Mechanical properties of a spray-cast aluminum alloy processed by severe plastic deformation
Xu, Cheng
Kawasaki, Megumi
Furukawa, Minoru
Horita, Zenji
Langdon, Terence G.
THERMEC 2006, PTS 1-5, 2007, 539-543 : 141 - +
[44] Grain refinement and Lattice Imperfections in Commercial Aluminum Alloy Processed by Severe Plastic Deformation
Charfeddine, Saifeddine
Zehani, Karim
Besais, Lotfi
Korchef, Atef
2014 GLOBAL CONFERENCE ON POLYMER AND COMPOSITE MATERIALS (PCM 2014), 2014, 62
[45] Fine surface microstructure of Fe3Al alloy after severe plastic deformation
Ren, Jiangwei
Li, Dong
MATERIALS LETTERS, 2016, 171 : 133 - 136
[46] Structure of aging Al-Li-Cu-Zr-Sc-Ag alloy after severe plastic deformation and long-term storage
Kaigorodova, L. I.
Rasposienko, D. Yu.
Pushin, V. G.
Pilyugin, V. P.
Smirnov, S. V.
PHYSICS OF METALS AND METALLOGRAPHY, 2015, 116 (11) : 1108 - 1115
[47] Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
Schuh, B.
Mendez-Martin, F.
Voelker, B.
George, E. P.
Clemens, H.
Pippan, R.
Hohenwarter, A.
ACTA MATERIALIA, 2015, 96 : 258 - 268
[48] ENHANCEMENT OF MECHANICAL PROPERTIES OF THE AA5754 ALUMINUM ALLOY WITH A SEVERE PLASTIC DEFORMATION
Izairi, Neset
Ajredini, Fadil
Vevecka-Priftaj, Aferdita
Ristova, Mimoza
MATERIALI IN TEHNOLOGIJE, 2014, 48 (03): : 385 - 388
[49] Enhanced Strengthening and Toughening of T6-Treated 7046 Aluminum Alloy through Severe Plastic Deformation
Wu, Yuna
Dong, Hongchen
Huang, Hao
Yuan, Ting
Bai, Jing
Jiang, Jinghua
Fang, Feng
Ma, Aibin
METALS, 2024, 14 (10)
[50] Annealing behavior of aluminum after low-temperature severe plastic deformation
Alyani, Ali
Kazeminezhad, Mohsen
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 824 (824):

← 1 2 3 4 5 →