Natural Aging of Aluminum Alloy 2024 After Severe Plastic Deformation

被引：16
|
作者：
Volokitina, Irina [1 ]
Bychkov, Andrey [2 ]
Volokitin, Andrey [3 ]
Kolesnikov, Alexandr [4 ]
机构：
[1] Rudny Ind Inst, 50 Let Oktyabrya Str 38, Rudny 111500, Kazakhstan
[2] Lomonosov Moscow State Univ, Leninskie Gory GSP 1, Moscow 119234, Russia
[3] Karaganda Ind Univ, Republ Ave 30, Temirtau 101400, Kazakhstan
[4] M Auezov South Kazakhstan Univ, Ave Tauke Khan,5, Shymkent 160012, Kazakhstan
来源：
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS | 2023年 / 12卷 / 03期
关键词：
Aluminum alloy; Severe plastic deformation; High-pressure torsion; Microstructure; Aging;
D O I：
10.1007/s13632-023-00966-y
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
This paper provides a laboratory-level evaluation of the cryogenic strain potential of aluminum alloy 2024 after severe plastic deformation by equal channel angular pressing method. Characteristics of the samples were determined by transmission electron microscopy, tensile tests and microhardness determination. Natural aging at room temperature for 24 days resulted in a change in the microhardness of aluminum samples. Thus, in samples strained at room temperature, the decrease in microhardness occurs by 250 MPa and in samples strained at a cryogenic temperature by 110 MPa. This can be explained by return processes which improve the characteristics of plasticity. As a result, a thermo-mechanical treatment mode was developed for aluminum alloy, including quenching, straining by equal channel angular pressing at liquid nitrogen temperature, followed by natural aging, which allows to obtain samples with certain parameters of structural strength of the alloy.
引用
收藏
页码：564 / 566
页数：3
相关论文
共 50 条
  • [11] Effect of plastic deformation on the precipitation sequence of 2024 aluminum alloy
    Guia-Tello, J. C.
    Garay-Reyes, C. G.
    Rodriguez-Cabriales, G.
    Medrano-Prieto, H. M.
    Ruiz-Esparza-Rodriguez, M. A.
    Garcia Hernandez, L. J.
    Mendoza-Duarte, J. M.
    Garcia-Aguirre, K. A.
    Estrada-Guel, I
    Gonzalez, S.
    Martinez-Sanchez, R.
    JOURNAL OF MATERIALS SCIENCE, 2022, 57 (03) : 2180 - 2193
  • [12] Deformation Behavior of 6061 Aluminum Alloy Through Tube Channel Pressing: Severe Plastic Deformation
    Farshidi, M. H.
    Kazeminezhad, M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (10) : 2099 - 2105
  • [13] Effect of severe plastic deformation on mechanical properties and microstructure in 7075 aluminum alloy
    Kuramoto, Shigeru
    Horibuchi, Kayo
    Aoi, Ichiro
    Oh-Ishi, Keiichiro
    Keikinzoku/Journal of Japan Institute of Light Metals, 2014, 64 (06): : 241 - 248
  • [14] Functional gradation of aluminum alloy by impact of ballistics as severe plastic deformation process
    Mishra, Vagish D.
    Mishra, Ashish
    Verma, Luv
    Rajesh, G.
    Rao, Balkrishna C.
    Murthy, H.
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2023, 174
  • [15] Structure and properties of Mg-Al-Ca alloy after severe plastic deformation
    Dobatkin, S. V.
    Estrin, Y.
    Rokhlin, L. L.
    Popov, M. V.
    Lapovok, R.
    Dobatkina, T. V.
    Timofeev, V. N.
    Nikitina, N. I.
    NANOMATERIALS BY SEVERE PLASTIC DEFORMATION IV, PTS 1 AND 2, 2008, 584-586 : 559 - 564
  • [16] Crack-induced intergranular corrosion behavior of aerial aluminum alloy subjected to severe plastic deformation
    Li, Jinghui
    Li, Fuguo
    Li, Jiang
    Liang, Shan
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2019, 70 (02): : 234 - 245
  • [17] Characterization of the microstructure, texture and mechanical properties of 7075 aluminum alloy in early stage of severe plastic deformation
    Moghaddam, M.
    Zarei-Hanzaki, A.
    Pishbin, M. H.
    Shafieizad, A. H.
    Oliveira, V. B.
    MATERIALS CHARACTERIZATION, 2016, 119 : 137 - 147
  • [18] Modeling the Hot Ductility of AA6061 Aluminum Alloy After Severe Plastic Deformation
    Khamei, A. A.
    Dehghani, K.
    Mahmudi, R.
    JOM, 2015, 67 (05) : 966 - 972
  • [19] Studies of Cu after severe plastic deformation
    Rodak, K.
    Radwanski, K.
    Molak, R.
    Pakiela, Z.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2010, 48 (05): : 313 - 319
  • [20] Nanostructural formation of fine grained aluminum alloy by severe plastic deformation at cryogenic temperature
    Yin, JG
    Lu, J
    Ma, HT
    Zhang, PS
    JOURNAL OF MATERIALS SCIENCE, 2004, 39 (08) : 2851 - 2854
12345