Comparing Ammonium and Tetraaminophosphonium Anion-Exchange Membranes Derived from Vinyl-Addition Polynorbornene Copolymers

被引:10
作者
Gaitor, Jamie C. [1 ]
Yang-Neyerlin, Ami C. [2 ]
Markovich, Danielle [3 ]
Fors, Brett P. [4 ]
Coates, Geoffrey W. [4 ]
Kourkoutis, Lena F. [3 ]
Pivovar, Bryan S. [2 ]
Kowalewski, Tomasz [1 ]
Noonan, Kevin J. T. [1 ]
机构
[1] Carnegie Mellon Univ, Dept Chem, Pittsburgh, PA 15213 USA
[2] Natl Renewable Energy Lab, Chem & Nanosci Ctr, Golden, CO 80401 USA
[3] Cornell Univ, Sch Appl & Engn Phys, Ithaca, NY 14853 USA
[4] Cornell Univ, Dept Chem & Chem Biol, Baker Lab, Ithaca, NY 14853 USA
关键词
vinyl addition polynorbornenes; anion exchange membranes; fuel cell; ammoniumpolymers; tetraaminophosphoniumpolymers; POLYMERIZATION; NORBORNENES;
D O I
10.1021/acsaem.3c02822
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Herein, we systematically examined how composition influenced the properties of vinyl addition polynorbornene anion exchange membranes (AEMs) prepared from 5-n-hexyl-2-norbornene and 5-(4-bromobutyl)-2-norbornene. Copolymerization kinetics revealed that 5-n-hexyl-2-norbornene is consumed faster than 5-(4-bromobutyl)-2-norbornene, leading to a portion of the chain being richer in bromoalkyl groups. The alkyl halide pendants can then be converted to either trimethylammonium or tetrakis(dialkylamino)phosphonium cations through straightforward substitution with trimethylamine or a tris(dialkylamino)phosphazene. A series of cationic ammonium polymers were synthesized first, where conductivity and water uptake increased as a function of increasing ionic content in the polymer. The optimized copolymer had a hydroxide conductivity of 95 +/- 6 mS/cm at 80 degrees C. The living polymerization of the two monomers catalyzed by a cationic tert-butylphosphine palladium catalyst also enabled precise changes in the molecular weight while keeping the functional group concentration constant. Molecular weight did not have a significant impact on hydroxide conductivity over the range of similar to 60-190 kg/mol (M-n). The optimized tetraaminophosphonium AEM had the highest conductivity for any tetraaminophosphonium polymer to date (70 +/- 3 mS/cm at 80 degrees C). Clear phase separation and larger domains were observed for the phosphonium-based AEM compared to the ammonium at an identical composition, which is attributed to the larger occupied volume of the phosphorus cation. Fuel cell studies with the two membranes resulted in peak power densities of 1.59 and 0.79 W/cm(2) for the ammonium and tetraaminophosphonium membrane electrode assemblies, respectively. The ammonium-based membrane was more water permeable as evidenced by water limiting current studies, which likely contributed to the improved performance.
引用
收藏
页码:1517 / 1526
页数:10
相关论文
共 50 条
[21]   Asymmetric electrode ionomer for low relative humidity operation of anion exchange membrane fuel cells [J].
Leonard, Daniel P. ;
Maurya, Sandip ;
Park, Eun Joo ;
Manriquez, Luis Delfin ;
Noh, Sangtaik ;
Wang, Xiaofeng ;
Bae, Chulsung ;
Baca, Ehren D. ;
Fujimoto, Cy ;
Kim, Yu Seung .
JOURNAL OF MATERIALS CHEMISTRY A, 2020, 8 (28) :14135-14144
[22]   Oxidative instability of ionomers in hydroxide-exchange-membrane water electrolyzers [J].
Lindquist, Grace A. ;
Gaitor, Jamie C. ;
Thompson, Willow L. ;
Brogden, Valerie ;
Noonan, Kevin J. T. ;
Boettcher, Shannon W. .
ENERGY & ENVIRONMENTAL SCIENCE, 2023, 16 (10) :4373-4387
[23]   Addition polymerization of norbornene-type monomers. High activity cationic allyl palladium catalysts [J].
Lipian, J ;
Mimna, RA ;
Fondran, JC ;
Yandulov, D ;
Shick, RA ;
Goodall, BL ;
Rhodes, LF ;
Huffman, JC .
MACROMOLECULES, 2002, 35 (24) :8969-8977
[24]   Vinyl-Addition Homopolymeization of Norbornenes with Bromoalkyl Groups [J].
Lunin, Artyom O. ;
Andreyanov, Fedor A. ;
Makarov, Igor S. ;
Bermeshev, Maxim V. .
POLYMERS, 2023, 15 (22)
[25]   Poly(norbornene) anion conductive membranes: homopolymer, block copolymer and random copolymer properties and performance [J].
Mandal, Mrinmay ;
Huang, Garrett ;
Ul Hassan, Noor ;
Mustain, William E. ;
Kohl, Paul A. .
JOURNAL OF MATERIALS CHEMISTRY A, 2020, 8 (34) :17568-17578
[26]   Highly Conductive Anion-Exchange Membranes Based on Cross-Linked Poly(norbornene): Vinyl Addition Polymerization [J].
Mandal, Mrinmay ;
Huang, Garrett ;
Kohl, Paul A. .
ACS APPLIED ENERGY MATERIALS, 2019, 2 (04) :2447-2457
[27]   Anionic multiblock copolymer membrane based on vinyl addition polymerization of norbornenes: Applications in anion-exchange membrane fuel cells [J].
Mandal, Mrinmay ;
Huang, Garrett ;
Kohl, Paul A. .
JOURNAL OF MEMBRANE SCIENCE, 2019, 570 :394-402
[28]  
Markovich Danielle, 2023, Microsc Microanal, V29, P1274, DOI [10.1093/micmic/ozad067.652, 10.1093/micmic/ozad067.652]
[29]   Versatile Route to Funetionalized Vinylie Addition Polynorbornenes [J].
Martinez-Arranz, Sheila ;
Albeniz, Ana C. ;
Espinet, Pablo .
MACROMOLECULES, 2010, 43 (18) :7482-7487
[30]   ADDITION POLYMERIZATION OF NORBORNENE CATALYZED BY PALLADIUM(2+) COMPOUNDS - A POLYMERIZATION REACTION WITH RARE CHAIN TRANSFER AND CHAIN TERMINATION [J].
MEHLER, C ;
RISSE, W .
MACROMOLECULES, 1992, 25 (16) :4226-4228