Selective corrosion of ?-Sn and intermetallic compounds in an Ag-Sn alloy at different potentials in NaCl and Na2SO4 solutions

被引：5

作者：

Dai, Wei ^{[1
]}

Liu, Yuanyuan ^{[1
]}

Huang, Ningge ^{[1
]}

Lan, Rulei ^{[1
]}

Zheng, Kangkang ^{[1
]}

Lu, Yixing ^{[1
]}

Li, Jin ^{[1
]}

Jiang, Yiming ^{[1
]}

Sun, Yangting ^{[1
]}

机构：

[1] Fudan Univ, Dept Mat Sci, State Key Lab Mol Engn Polymers, Shanghai 200438, Peoples R China

来源：

CORROSION SCIENCE | 2023年 / 212卷

基金：

中国国家自然科学基金;

关键词：

Selective corrosion; Bipolar electrochemistry; Ag-Sn alloy; IMCs; Potential-pH diagram; LEAD-FREE SOLDERS; BIPOLAR ELECTROCHEMISTRY; SN-3.0AG-0.5CU SOLDER; TIN; BEHAVIOR; MICROSTRUCTURE; AG3SN; THERMODYNAMICS; TEMPERATURE; MORPHOLOGY;

D O I：

10.1016/j.corsci.2022.110958

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The corrosion behavior of beta-Sn and intermetallic compounds in Ag-28Sn alloy was investigated by potentio-dynamic polarization and bipolar electrochemistry tests. The potential distribution along the bipolar electrode was measured. The results show that the potential distribution is linear along the center of the bipolar electrode. In the Na2SO4 solution Ag4Sn intermetallic compounds preferentially corrode at high potential and beta-Sn at low potential; in the NaCl solution, beta-Sn preferentially corrodes at both high and low potential. Based on the potential-pH diagram, the selective corrosion mechanism of the Ag-Sn alloy is elucidated.

引用

页数：12

共 44 条

[31] Effect of dispersion particles and precipitates on the corrosion properties of ODS-Cu, Cu-Cr-Zr and Cu-Cr alloys in Na2SO4 solutions
Hatakeyama, Masahiko
Okada, Kai
Sunada, Satoshi
Sato, Koichi
NUCLEAR MATERIALS AND ENERGY, 2022, 31
[32] Comparative hot corrosion performance of arc ion plated NiCoCrAlYSiHf coating in Na2SO4/NaCl/V2O5-media via high-current pulsed electron beam
Cai, Jie
Wei, Jianzhong
Zu, Zhangkun
Guan, Qingfeng
Lyu, Peng
MATERIALS CHARACTERIZATION, 2022, 191
[33] Hot corrosion behaviour of constant and pulsed current welded Hastelloy X in Na2SO4, V2O5, and NaCl salt mixture at 900 °C
Sathishkumar, M.
Manikandan, M.
Arivazhagan, N.
Arulmurugan, B.
Selvaraj, Senthil Kumaran
Vignesh, M.
Rajakumar, S.
Rajkumar, S.
MATERIALS RESEARCH EXPRESS, 2022, 9 (02)
[34] Cyclic oxidation and hot corrosion performance of direct metal laser sintered and wrought alloy 718 at 800°C in air and molten salts containing Na2SO4, V2O5 and NaCl
Muthu, S. M.
Veeman, Dhinakaran
Paul, Shiladithya
Kumar, M. Prem
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2023, 58 (07) : 631 - 644
[35] High velocity oxygen fuel sprayed Cr3C2-NiCr coatings against Na2SO4 hot corrosion at different temperatures
Shi, Mengchuan
Xue, Zhaolu
Liang, Heping
Yan, Zupeng
Liu, Xia
Zhang, Shihong
CERAMICS INTERNATIONAL, 2020, 46 (15) : 23629 - 23635
[36] Corrosion behaviour of electroless high boron-mid phosphorous nickel duplex coatings in the as-plated and heat-treated states in NaCl, H2SO4, NaOH and Na2SO4 media
Bonin, L.
Vitry, V.
Delaunois, F.
MATERIALS CHEMISTRY AND PHYSICS, 2018, 208 : 77 - 84
[37] Assessment of Hot Corrosion in Molten Na2SO4 and V2O5 of Inconel 625 Fabricated by Selective Laser Melting versus Conventional Technology
Badea, Teodor Adrian
Batalu, Dan
Constantin, Nicolae
Paraschiv, Alexandru
Patroi, Delia
Ceatra, Laurentiu Constantin
MATERIALS, 2022, 15 (12)
[38] Hot corrosion behaviors of a Cr13Ni5Si2-based metal silicide alloy in Na2SO4+25 wt.% K2SO4 and Na2SO4+25 wt.% NaCl molten salts
Yuan, L.
Wang, H. M.
INTERMETALLICS, 2010, 18 (03) : 324 - 329
[39] Wavelength and concentration-dependent optical constants of NaCl, KCl, MgCl2, CaCl2, and Na2SO4 multi-component mixed-salt solutions
Wang, C. C.
Tan, J. Y.
Liu, L. H.
APPLIED OPTICS, 2017, 56 (27) : 7662 - 7671
[40] Comparative investigation of oxidation behavior and hot corrosion behavior in NaCl-Na2SO4 mixture for a Ti2AlNb based alloy at 1023 K
Xiang, Jiayi
Xie, Faqin
Wu, Xiangqing
Wang, Shaoqing
INTERMETALLICS, 2021, 132

← 1 2 3 4 5 →