Representative Real-Time Dataset Generation Based on Automated Fault Injection and HIL Simulation for ML-Assisted Validation of Automotive Software Systems

Recently, a data-driven approach has been widely used at various stages of the system development lifecycle thanks to its ability to extract knowledge from historical data. However, despite its superiority over other conventional approaches, e.g., approaches that are model-based and signal-based, the availability of representative datasets poses a major challenge. Therefore, for various engineering applications, new solutions to generate representative faulty data that reflect the real world operating conditions should be explored. In this study, a novel approach based on a hardware-in-the-loop (HIL) simulation and automated real-time fault injection (FI) method is proposed to generate, analyse and collect data samples in the presence of single and concurrent faults. The generated dataset is employed for the development of machine learning (ML)-assisted test strategies during the system verification and validation phases of the V-cycle development model. The developed framework can generate not only time series data but also a textual data including fault logs in an automated manner. As a case study, a high-fidelity simulation model of a gasoline engine system with a dynamic entire vehicle model is utilised to demonstrate the capabilities and benefits of the proposed framework. The results reveal the applicability of the proposed framework in simulating and capturing the system behaviour in the presence of faults occurring within the system's components. Furthermore, the effectiveness of the proposed framework in analysing system behaviour and acquiring data during the validation phase of real-time systems under realistic operating conditions has been demonstrated.