Experimental investigation and performance evaluation of an oval tubular solar still with phase change material

被引:41
作者
Aly, Wael I. A. [1 ]
Tolba, Mostafa A. [1 ]
Abdelmagied, Mahmoud [1 ]
机构
[1] Helwan Univ, Fac Technol & Educ, Dept Refrigerat & Air Conditioning Technol, Cairo 11282, Egypt
关键词
Solar desalination; Oval tubular solar still; PCM; Productivity enhancement; Water depth; Exergy efficiency; THERMAL STRATIFICATION; EXERGY ANALYSIS; ABSORBER PLATE; WATER DEPTH; ENERGY; DESALINATION; HEAT; ENHANCEMENT; PCM; NANOFLUIDS;
D O I
10.1016/j.applthermaleng.2022.119628
中图分类号
O414.1 [热力学];
学科分类号
摘要
The problem of freshwater scarcity is a major issue for people all over the world. Solar still is one of the most simplest and affordable ways to produce freshwater using solar energy which is available with no cost and eco-friendly. Recently, tubular solar stills (TSS) have gained popularity as one of the best solutions for acquiring pure water, especially in arid and coastal areas. The main objective of this paper is to enhance the productivity and efficiency of TSS by introducing a new form/shape, the oval tubular solar still (OTSS), integrated with cover cooling and phase change material (PCM). The OTSS is made of a transparent oval tube that is permeable to sunlight from all directions to maximize solar irradiance, and it is integrated with a black basin to improve absorption and water evaporation. It has an appropriate level of flexibility, durability, and low cost. Experiments were conducted out in the climatic conditions of Cairo, Egypt. This paper investigated different basin water depths and different water cover cooling flow rates to obtain their optimal values. Moreover, the effects of using PCM as a thermal management solution were studied in detail. In the case of no cooling, it is observed that the production rate decreases with increasing the water depth in the basin and the maximum production rate reached up to 5.21 L/m2/day at the optimal water depth of 0.5 cm. However, with cooling, the maximum production rate of 6.34 L/m2/day was achieved at the optimum water-cooling flow rate of 2 L/h. Using the PCM the maximum production rate of 6.78 L/m2/day was able to be achieved. The efficiency and productivity of the OTSS were enhanced by 41.26 % and 32.42 %, respectively, when using PCM. Furthermore, the daily thermal exergy efficiency of the OTSS was 3.46 %, 3.85 %, and 4.14 % for the cases no cooling, with cooling and with PCM, respectively. Economically, the cost per liter of desalinated water production was $0.020, $0.017, and $0.017 for the three cases, respectively.
引用
收藏
页数:14
相关论文
共 50 条
  • [41] Performance investigation on a new solar air heater using phase change material/expanded metal mesh composite as heat storage unit: An experimental study
    Farzan, Hadi
    Zaim, Ehsan Hasan
    Amiri, Tayebeh
    JOURNAL OF ENERGY STORAGE, 2022, 47
  • [42] Annual Performance Evaluation of Evacuated Tube Solar Air Collector With Phase Change Material
    Mehla, Neeraj
    Kumar, Manoj
    Yadav, Avadhesh
    JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, 2020, 142 (03):
  • [43] Phase change material heat storage performance in the solar thermal storage structure employing experimental evaluation
    Huang, Mingyang
    He, Wei
    Incecik, Atilla
    Gupta, Munish Kumar
    Krolczyk, Grzegorz
    Li, Zhixiong
    JOURNAL OF ENERGY STORAGE, 2022, 46
  • [44] Performance evaluation of double slope solar still augmented with binary eutectic phase change material and steel wool fibre
    Agrawal, Rahul
    Singh, Krishna Deo Prasad
    SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, 2021, 48
  • [45] Desalination performance evaluation of a solar still enhanced by thermoelectric modules
    Mandev, Emre
    Muratcobanoglu, Burak
    Manay, Eyuphan
    Sahin, Bayram
    SOLAR ENERGY, 2024, 268
  • [46] Experimental investigation of a pyramid type solar still with porous material: productivity assessment
    Yarramsetty, Naresh
    Sharma, Naveen
    Narayana, Modumudi Lakshmi
    WORLD JOURNAL OF ENGINEERING, 2023, 20 (01) : 178 - 185
  • [47] Improving the drum solar still performance using corrugated drum and nano-based phase change material
    Saeed, Amer A.
    Alharthi, Abdulaziz M.
    Aldosari, Khaled M.
    Abdullah, A. S.
    Essa, Fadl A.
    Alqsair, Umar F.
    Aljaghtham, Mutabe
    Omara, Z. M.
    JOURNAL OF ENERGY STORAGE, 2022, 55
  • [48] Numerical investigation on thermal performance of the solar wall integrated with phase change material
    Duan, Shuangping
    Huang, Changyan
    Meng, Chuang
    ENERGY AND BUILDINGS, 2025, 336
  • [49] Experimental and theoretical investigation to optimize the performance of solar still
    Subramanian, Kumaravel
    Meenakshisundaram, Nagaraj
    Barmavatu, Praveen
    DESALINATION AND WATER TREATMENT, 2024, 318
  • [50] Experimental study on the effect of the black wick on tubular solar still performance
    Ahmed, Mohamed M. Z.
    Alshammari, Fuhaid
    Alqsair, Umar F.
    Alhadri, Muapper
    Abdullah, A. S.
    Elashmawy, Mohamed
    CASE STUDIES IN THERMAL ENGINEERING, 2022, 38