A different attempt to analysis friction stir spot welding of AA5083-copper alloys

被引：41
作者：
Bagheri, Behrouz [1 ,3 ]
Abdollahzadeh, Amin [2 ]
Shamsipur, Ali [1 ]
机构：
[1] Amirkabir Univ Technol, Dept Mat & Met Engn, Tehran, Iran
[2] Shahid Chamran Univ Ahvaz, Fac Engn, Dept Mat Sci & Engn, Ahvaz, Iran
[3] 350, Hafez Ave, Valiasr Sq, Tehran, Iran
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2023年 / 39卷 / 09期
关键词：
Joining; SiC particles; microstructure; mechanical properties; fracture mechanism; ALUMINUM; COPPER; PARTICLES;
D O I：
10.1080/02670836.2022.2159633
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A study has been made on the possibility of friction stir spot welding (FSSW) of the aluminium to copper sheet with SiC nanoparticles. Modified microstructures with different morphologies and properties were observed in the joint interface. It has been shown that the reinforcing particles cause an increasing role in the developed mechanical properties of joint samples such as strength and hardness due to the more particle-stimulated nucleation of recrystallisation (PSN), Zener pinning effect, and larger tension for the movement of dislocations. The experimental measurements indicated that AlCu and Al2Cu were the main intermetallic compounds formed in the interfacial region. It was concluded from fracture surfaces that ductile fracture is the primary fracture mode during the FSSW with SiC reinforcing particles.
引用
收藏
页码：1083 / 1089
页数：7
相关论文
共 26 条
[1]   New attempt to improve friction stir brazing [J].
Abbasi, Mahmoud ;
Baghei, Behrouz .
MATERIALS LETTERS, 2021, 304
[2]   New method to enhance the mechanical characteristics of Al-5052 alloy weldment produced by tungsten inert gas [J].
Abbasi, Mahmoud ;
Givi, Mohammad ;
Bagheri, Behrouz .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2020,
[3]   Mechanical, wear and corrosion behaviors of AZ91/SiC composite layer fabricated by friction stir vibration processing [J].
Abdollahzadeh, Amin ;
Bagheri, Behrouz ;
Abbasi, Mahmoud ;
Sharifi, Farzaneh ;
Ostovari Moghaddam, Ahmad .
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2021, 9 (03)
[4]   Investigation into novel multipass friction stir vibration brazing of carbon steels [J].
Bagheri, Behrouz ;
Abbasi, Mahmoud ;
Sharifi, Farzaneh ;
Abdollahzadeh, Amin .
MATERIALS AND MANUFACTURING PROCESSES, 2022, 37 (08) :921-932
[5]   A comparative study between friction stir processing and friction stir vibration processing to develop magnesium surface nanocomposites [J].
Bagheri, Behrouz ;
Abbasi, Mahmoud ;
Abdollahzadeh, Amin ;
Kokabi, Amir Hossein .
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2020, 27 (08) :1133-1146
[6]   Development of AZ91/SiC surface composite by FSP: effect of vibration and process parameters on microstructure and mechanical characteristics [J].
Bagheri, Behrouz ;
Abbasi, Mahmoud .
ADVANCES IN MANUFACTURING, 2020, 8 (01) :82-96
[7]   The investigation into vibration effect on microstructure and mechanical characteristics of friction stir spot vibration welded aluminum: Simulation and experiment [J].
Bagheri, Behrouz ;
Abbasi, Mahmoud ;
Hamzeloo, Reza .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2020, 234 (09) :1809-1822
[8]   The effect of SiC/Al2O3 particles used during FSP on mecinnical properties of AZ91 magnesium alloy [J].
Dadaei, Mostafa ;
Omidvar, Hamid ;
Bagheri, Behrouz ;
Jahazi, Mohammad ;
Abbasi, Mahmoud .
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2014, 105 (04) :369-374
[9]   Metallurgical and Mechanical Properties of Al-Cu Joint by Friction Stir Spot Welding and Modified Friction Stir Clinching [J].
Gao, Pingqiang ;
Zhang, Yan ;
Mehta, Kush P. .
METALS AND MATERIALS INTERNATIONAL, 2021, 27 (08) :3085-3094
[10]   Microstructure and hardness of friction stir welded aluminium-copper matrix-based composite reinforced with 10 wt-% SiCp [J].
Kumar, A. ;
Nayak, C. Veeresh ;
Herbert, M. A. ;
Rao, S. S. .
MATERIALS RESEARCH INNOVATIONS, 2014, 18 :84-89
123