Transferring heat accumulated by asphalt pavement from inside to outside through carbon fibers

On the Qinghai-Tibet Plateau, intense solar irradiation will cause serious heat accumulation in asphalt pavement. Downward heat transfer will disturb the permafrost under subgrade, thus leading to a series of subgrade and pavement diseases. This makes construction of asphalt pavement in the permafrost regions of the Qinghai-Tibet Plateau a world-class challenge. This paper proposes for the first time a transversal heat transfer channel in asphalt pavement, which can quickly transfer heat accumulated in pavement to road shoulders. Finite element software ABAQUS was used to simulate the rutting plate with high axial thermal conductivity carbon fibers inserted transversely. Under the constant heat load of 500 W/m2, the heat flux near the carbon fibers showed the characteristic of convergence. The maximum transverse heat flux in the carbon fibers reached 4.97 x 107 W/m2, which was 14 times that in the asphalt mixture. Meanwhile, the maximum vertical heat flux in the carbon fibers reduced to 2.62 x 106 W/m2, which was 12 % less than the asphalt mixture. The effective thermal conductivity of composite specimens with different carbon fiber parameters was studied through control ex-periments. When the axial thermal conductivity, volume fraction and number of carbon fiber bundles increased to 100 W/(m.degrees C), 10.72 % and 4 bundles respectively, the transverse ETC of composite specimens increased to 4.05 W/(m.degrees C), 7.09 W/(m.degrees C) and 16.18 W/(m.degrees C) respectively. They were 3.12 times, 5.45 times and 12.45 times of the control group. The radial thermal conductivity of carbon fibers has a significant effect on the vertical ETC. When it decreased to 0.2 W/(m.degrees C), the vertical ETC decreased by 6.15 % compared with the control group. The temperature variation trend of specimens were measured by a laboratory irradiation experiment. The maximum temperature difference between the control group and the experimental group at 0 mm was 5.81 degrees C, and the average temperature difference within 2 h was 5.14 degrees C. The maximum temperature difference at 50 mm was 3.84 degrees C and the average temperature difference within 2 h was 3.24 degrees C. The results showed that the transverse heat transfer channel can reduce downward heat transfer. The application of the channels will enhance transverse heat release and relieve heat accumulation of asphalt pavement. This can create a low temperature state for pavement structure and has a positive effect on maintaining the stability of the permafrost regions on the Qinghai-Tibet Plateau.