Multi-response Optimization of PMEDM on Inconel 718 Using Hybrid T-GRA TOPSIS, and ANN Model

被引：0

作者：

Ram, Jana Sai ^{[1
]}

Shiek, Jeavudeen ^{[1
]}

Syed, Shaul Hameed ^{[1
]}

机构：

[1] B S Abdur Rahman Crescent Inst Sci & Technol, Dept Mech Engn, Chennai, India

来源：

FME TRANSACTIONS | 2023年 / 51卷 / 04期

关键词：

Multi-attribute Decision Making; T-GRA; TOPSIS; ANN; PMEDM; MRR; TWR; SR; PROCESS PARAMETERS; MULTIOBJECTIVE OPTIMIZATION; SURFACE-ROUGHNESS; EDM PROCESS; DISCHARGE; POWDER; PERFORMANCE; ELECTRODES; COMPOSITE; COPPER;

D O I：

10.5937/fme2304564R

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Inconel 718 is one of the Nickel-based superalloys considered one of the parameters with a delivery side pressure of 6 bar for the Alumina mixed roughness (SR) have been taken as output responses. The results have been from T-GRA & TOPSIS have been validated by developing a singlelayered ANN model. Ranks predicted by the ANN model are the same for T-GRA and TOPSIS and the R-values are 0.924 & 0.871, respectively. ANOVAhas also been used to analyze parameter effects on output responses.

引用

页码：564 / 574

页数：11

共 46 条

[1] Electrical discharge machining (EDM) of Inconel 718 by using copper electrode at higher peak current and pulse duration
Ahmad, S.
Lajis, M. A.
[J]. 2ND INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH (ICMER 2013), 2013, 50
[2] Balasubramanian P., 2014, PROCEDIA MAT SCI, V6, P1292, DOI DOI 10.1016/j.mspro.2014.07.108
[3] BHARTI P.S., 2010, International Journal of Engineering Science and Technology, V2, P6464
[4] MULTI-OBJECTIVE OPTIMIZATION OF EDM PROCESS PARAMETERS USING RSM-BASED GRA AND TOPSIS METHOD FOR GRADE 6 TITANIUM ALLOY
Bhaumik, Munmun
Maity, Kalipada
Das Mohapatra, Kasinath
[J]. SURFACE REVIEW AND LETTERS, 2021, 28 (07)
[5] An approach for optimization the process parameter by using TOPSIS Method of Al-24%SiC metal matrix composite during EDM
Bhuyan, Rajesh Kumar
Routara, B. C.
Parida, Arun Kumar
[J]. MATERIALS TODAY-PROCEEDINGS, 2015, 2 (4-5) : 3116 - 3124
[6] Boothroyd G, 1989, Fundam. mach. and mach. tools, V491
[7] Dar A, 2017, Accounting, V4, P113
[8] Investigation and Optimization of Machining Parameters Influence on Surface Roughness in Turning AISI 4340 Steel
Deepanraj, Balakrishnan
Raman, Lakshmipathi Anantha
Senthilkumar, Natarajan
Shivasankar, Jayakumar
[J]. FME TRANSACTIONS, 2020, 48 (02): : 383 - 390
[9] Optimization of Quality and Productivity of Wire EDM by Using L9 Orthogonal Array
Dewangan, Shailesh Kumar
Kumar, Prakash
Jha, Sanjay Kumar
[J]. ADVANCES IN INDUSTRIAL AND PRODUCTION ENGINEERING, 2019, : 93 - 100
[10] Machinability Studies and Optimization of Process Parameters in Wire Electrical Discharge Machining of Aluminum Hybrid Composites by the VIKOR Method
Dhilip, Jafrey Daniel James
Ganesan, Karthik Pandiyan
Sivalingam, Vinothkumar
[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (11) : 5547 - 5562

← 1 2 3 4 5 →