Comprehensive study of recycling municipal solid waste incineration fly ash in lightweight aggregate with bloating agent: Effects of water washing and bloating mechanism

被引:13
作者
Han, Siyu [1 ]
Ju, Tongyao [1 ]
Meng, Fanzhi [1 ]
Lin, Li [1 ]
Li, Jinglin [1 ]
Chen, Kailun [1 ]
Jiang, Jianguo [1 ]
机构
[1] Tsinghua Univ, Sch Environm, Beijing 100084, Peoples R China
基金
中国国家自然科学基金;
关键词
MSWIfly ash; Lightweight aggregate; Water washing; Heavy metal; Bloating mechanism; FLUIDIZED-BED; SEWAGE-SLUDGE; HEAVY-METALS; BOTTOM ASH; GLASS; TEMPERATURE; BEHAVIOR; STABILIZATION; PREDICTION; CERAMSITE;
D O I
10.1016/j.scitotenv.2023.163267
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Recycling into lightweight aggregate (LWA) by sintering is a promising technology for disposal of municipal solid waste incineration fly ash (FA). In this study, FA and washed FA (WFA) were combined with bentonite and SiC (bloating agent) to make LWA. The performance was comprehensively studied by hot-stage microscopy and laboratory preparation experiments. Water washing and increased FA/WFA improved LWA bloating extent, while shorten the bloating temperature range. Water washing also increased the 1 h-water absorption rate of LWA, making it harder to meet the standard. Excessive FA /WFA usage (70 wt%) will prevent LWA from bloating. For the goal of recycling more FA, mixture with 50 wt% WFA could prepare LWA that meet standard GB/T 17431 at 1140-1160 degrees C. After water washing, the ratio of Pb, Cd, Zn, and Cu stabilized in LWA increased by 279 %, 410 %, 458 %, and 109 % for 30 wt% FA/WFA addition, and 364 %, 554 %, 717 %, and 697 % for 50 wt% FA/WFA addition, respectively. The change of liquid phase content and viscosity at high temperature were determined using the thermodynamic calculations and chemical compositions. The bloating mechanism was further investigated by integrating these two properties. To obtain accurate results of the bloat viscosity range (2.75-4.44 log Pa center dot s) for high CaO systems, the composition of the liquid phase should be taken into account. The liquid phase viscosity required for bloating start was proportional to the liquid phase content. With temperature increasing, bloating would end when viscosity drops to 2.75 log Pa center dot s or liquid phase content reach 95 %. These findings provided further understanding of the heavy metal stabilization during LWA production and the bloating mechanism of high CaO content systems, and could contribute to the feasibility and sustainability of recycling FA and other CaO-rich solid wastes into LWA.
引用
收藏
页数:12
相关论文
共 59 条
  • [1] [Anonymous], 2010, GBT1743112010 STAT A
  • [2] [Anonymous], 2008, 89782008 GB MIN EC E
  • [3] [Anonymous], 2010, HJ 557-2010
  • [4] [Anonymous], 2020, 11342020 HJ MIN EC E
  • [5] Ceramisation of hazardous elements: Benefits and pitfalls of the inertisation through silicate ceramics
    Ardit, Matteo
    Zanelli, Chiara
    Conte, Sonia
    Molinari, Chiara
    Cruciani, Giuseppe
    Dondi, Michele
    [J]. JOURNAL OF HAZARDOUS MATERIALS, 2022, 423
  • [6] Recycling of waste glasses into partially crystallized glass foams
    Bernardo, Enrico
    Scarinci, Giovanni
    Bertuzzi, Paolo
    Ercole, Piero
    Ramon, Ludovico
    [J]. JOURNAL OF POROUS MATERIALS, 2010, 17 (03) : 359 - 365
  • [7] The effect of additives on the properties of lightweight aggregates produced from clay
    Bernhardt, Markus
    Justnes, Harald
    Tellesbo, Hilde
    Wiik, Kjell
    [J]. CEMENT & CONCRETE COMPOSITES, 2014, 53 : 233 - 238
  • [8] Bertolini L., 2013, Corrosion of Steel in Concrete: Prevention, Diagnosis, Repair, P93, DOI [10.1002/9783527651696.ch6, DOI 10.1002/9783527651696.CH6]
  • [9] Changes in composition and lead speciation due to water washing of air pollution control residue from municipal waste incineration
    Bogush, A. A.
    Stegemann, J. A.
    Roy, A.
    [J]. JOURNAL OF HAZARDOUS MATERIALS, 2019, 361 : 187 - 199
  • [10] Properties of lightweight aggregate produced by rapid sintering of incinerator bottom ash
    Cheeseman, CR
    Makinde, A
    Bethanis, S
    [J]. RESOURCES CONSERVATION AND RECYCLING, 2005, 43 (02) : 147 - 162