Deformation Behavior and Microstructure of 6061 Aluminum Alloy Processed by Severe Plastic Deformation Using Biaxial Alternate Forging

被引:1
|
作者
Ha, Seong-Ho [1 ]
Shin, Young-Chul [1 ]
机构
[1] Korea Inst Ind Technol, Incheon 21999, South Korea
关键词
biaxial alternate forging; severe plastic deformation; FEM; AA6061; mechanical property; AL-MG ALLOY; STRENGTH; DUCTILITY; HOT;
D O I
10.3390/ma17050968
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The deformation behavior and microstructure of 6061 aluminum alloy processed by severe plastic deformation (SPD) using biaxial alternate forging that can evaluate the forming limit and mechanical properties of alloys, simultaneously, were investigated in this study. A finite element (FE) analysis on the biaxial alternating forging process, considering the strain-hardening coefficient and forging pass of the material, was conducted. When the strain-hardening coefficient is 0, an average effective strain of 440% was found within a diameter of 4 mm in the core of the workpiece after eight passes, while it was 300% at the same pass number when the strain-hardening coefficient was 0.2. The average effective strain estimated from the FE analysis was about 264% after eight passes of forging, which is considered to be a level of SPD that significantly exceeds the elongation of the raw material. As a result of the tensile test according to the forging pass, after two passes, the strength of the material could be gradually improved without significant degradation of elongation. Even though a large strain of 264% was found after eight passes were applied, deformed grains and twins with no recrystallized structure in optical microstructures with different forging passes were found.
引用
收藏
页数:16
相关论文
共 50 条
  • [31] Modeling the Hot Ductility of AA6061 Aluminum Alloy After Severe Plastic Deformation
    Khamei, A. A.
    Dehghani, K.
    Mahmudi, R.
    JOM, 2015, 67 (05) : 966 - 972
  • [32] Modeling the Hot Ductility of AA6061 Aluminum Alloy After Severe Plastic Deformation
    A. A. Khamei
    K. Dehghani
    R. Mahmudi
    JOM, 2015, 67 : 966 - 972
  • [33] Biological behavior of titanium processed by severe plastic deformation
    Kubacka, Dorota
    Yamamoto, Akiko
    Wiecinski, Piotr
    Garbacz, Halina
    APPLIED SURFACE SCIENCE, 2019, 472 : 54 - 63
  • [34] Evolution of microstructure and deformation behavior of pure iron by severe plastic deformation
    Han, BQ
    Chiou, WA
    Lavernia, EJ
    Mohamed, FA
    ELECTRON MICROSCOPY: ITS ROLE IN MATERIALS SCIENCE: THE MIKE MESHII SYMPOSIUM, 2003, : 209 - 216
  • [35] Grain size effects in aluminum processed by severe plastic deformation
    Koizumi, Takayuki
    Kuroda, Mitsutoshi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 710 : 300 - 308
  • [36] Microstructure evolution of a multiphase superalloy processed by severe plastic deformation
    Sauvage, Xavier
    Mukhtarov, Shamil
    6TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION (NANOSPD6), 2014, 63
  • [37] Deformation behavior of Cu-based nanocomposite processed by severe plastic deformation
    Islamgaliev, RK
    Buchgraber, W
    Kolobov, YR
    Amirkhanov, NM
    Sergueeva, AV
    Ivanov, KV
    Grabovetskaya, GP
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 319 : 872 - 876
  • [38] Hot Deformation Behavior and Dynamic Recrystallization of 6061 Aluminum Alloy
    Chu, Zhaojie
    Li, Bo
    Wang, Wenhao
    Du, Yong
    Sun, Yu
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2021, 50 (07): : 2502 - 2510
  • [39] Hot Deformation Behavior and Dynamic Recrystallization of 6061 Aluminum Alloy
    Chu Zhaojie
    Li Bo
    Wang Wenhao
    Du Yong
    Sun Yu
    RARE METAL MATERIALS AND ENGINEERING, 2021, 50 (07) : 2502 - 2510
  • [40] Superplasticity in a 5024 Aluminium Alloy Processed by Severe Plastic Deformation
    Mogucheva, Anna
    Tagirova, Diana
    Kaibyshev, Rustam
    SUPERPLASTICITY IN ADVANCED MATERIALS, 2013, 735 : 353 - 358