Deformation Behavior and Microstructure of 6061 Aluminum Alloy Processed by Severe Plastic Deformation Using Biaxial Alternate Forging

被引:1
|
作者
Ha, Seong-Ho [1 ]
Shin, Young-Chul [1 ]
机构
[1] Korea Inst Ind Technol, Incheon 21999, South Korea
关键词
biaxial alternate forging; severe plastic deformation; FEM; AA6061; mechanical property; AL-MG ALLOY; STRENGTH; DUCTILITY; HOT;
D O I
10.3390/ma17050968
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The deformation behavior and microstructure of 6061 aluminum alloy processed by severe plastic deformation (SPD) using biaxial alternate forging that can evaluate the forming limit and mechanical properties of alloys, simultaneously, were investigated in this study. A finite element (FE) analysis on the biaxial alternating forging process, considering the strain-hardening coefficient and forging pass of the material, was conducted. When the strain-hardening coefficient is 0, an average effective strain of 440% was found within a diameter of 4 mm in the core of the workpiece after eight passes, while it was 300% at the same pass number when the strain-hardening coefficient was 0.2. The average effective strain estimated from the FE analysis was about 264% after eight passes of forging, which is considered to be a level of SPD that significantly exceeds the elongation of the raw material. As a result of the tensile test according to the forging pass, after two passes, the strength of the material could be gradually improved without significant degradation of elongation. Even though a large strain of 264% was found after eight passes were applied, deformed grains and twins with no recrystallized structure in optical microstructures with different forging passes were found.
引用
收藏
页数:16
相关论文
共 50 条
  • [21] Severe plastic deformation of rheoforged aluminum alloy A356
    Dodangeh, A.
    Kazeminezhad, M.
    Aashuri, H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 558 : 371 - 376
  • [22] Expansion-continuous shear deformation behavior of 6061 aluminum alloy
    Xiang Y.
    Lu L.-W.
    Wu M.-Y.
    Ma M.
    Kang W.
    Liu H.
    Tang L.-Y.
    Lu, Li-Wei (cqulqyz@126.com), 2020, Beijing Institute of Aeronautical Materials (BIAM) (48): : 111 - 118
  • [23] An Investigation of Cavity Development during Superplastic Flow in a Zinc-Aluminum Alloy Processed Using Severe Plastic Deformation
    Kawasaki, Megumi
    Langdon, Terence G.
    MATERIALS TRANSACTIONS, 2012, 53 (01) : 87 - 95
  • [24] The deformation behavior of aluminum alloy in a novel severe plastic deformation process known as combined SSE-FE process
    Izi, Ali
    Ahmadi, Farshid
    Honarpisheh, Mohammad
    MANUFACTURING LETTERS, 2024, 40 : 104 - 108
  • [25] Effect of Severe Plastic Deformation on the Mechanical Properties of Al6061 Alloy
    Mishra, Vagish D.
    Palaniappan, Karthik
    Rao, Balkrishna C.
    Murthy, H.
    TMS 2020 149TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2020, : 2113 - 2116
  • [26] Expansion-continuous shear deformation behavior of 6061 aluminum alloy
    Xiang Yao
    Lu Li-wei
    Wu Mu-yi
    Ma Min
    Kang Wei
    Liu Huan
    Tang Lun-yuan
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2020, 48 (12): : 111 - 118
  • [27] The fundamentals of nanostructured materials processed by severe plastic deformation
    Yuntian T. Zhu
    Terence G. Langdon
    JOM, 2004, 56 : 58 - 63
  • [28] Strengthening of aluminum alloys using severe plastic deformation
    Horita Z.
    Keikinzoku/Journal of Japan Institute of Light Metals, 2023, 73 (12): : 559 - 569
  • [29] Aging behavior of aluminum alloys after severe plastic deformation
    Horita, Zenji
    ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, 519-521 : 1485 - 1492
  • [30] Effects of severe plastic deformation on the corrosion behavior of aluminum alloys
    Eiji Akiyama
    Zuogui Zhang
    Yoshimi Watanabe
    Kaneaki Tsuzaki
    Journal of Solid State Electrochemistry, 2009, 13 : 277 - 282