Deformation Behavior and Microstructure of 6061 Aluminum Alloy Processed by Severe Plastic Deformation Using Biaxial Alternate Forging

被引:1
|
作者
Ha, Seong-Ho [1 ]
Shin, Young-Chul [1 ]
机构
[1] Korea Inst Ind Technol, Incheon 21999, South Korea
关键词
biaxial alternate forging; severe plastic deformation; FEM; AA6061; mechanical property; AL-MG ALLOY; STRENGTH; DUCTILITY; HOT;
D O I
10.3390/ma17050968
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The deformation behavior and microstructure of 6061 aluminum alloy processed by severe plastic deformation (SPD) using biaxial alternate forging that can evaluate the forming limit and mechanical properties of alloys, simultaneously, were investigated in this study. A finite element (FE) analysis on the biaxial alternating forging process, considering the strain-hardening coefficient and forging pass of the material, was conducted. When the strain-hardening coefficient is 0, an average effective strain of 440% was found within a diameter of 4 mm in the core of the workpiece after eight passes, while it was 300% at the same pass number when the strain-hardening coefficient was 0.2. The average effective strain estimated from the FE analysis was about 264% after eight passes of forging, which is considered to be a level of SPD that significantly exceeds the elongation of the raw material. As a result of the tensile test according to the forging pass, after two passes, the strength of the material could be gradually improved without significant degradation of elongation. Even though a large strain of 264% was found after eight passes were applied, deformed grains and twins with no recrystallized structure in optical microstructures with different forging passes were found.
引用
收藏
页数:16
相关论文
共 50 条
  • [1] On the natural aging behavior of Aluminum 6061 alloy after severe plastic deformation
    Farshidi, M. H.
    Kazeminezhad, M.
    Miyamoto, H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 580 : 202 - 208
  • [2] Deformation Behavior of 6061 Aluminum Alloy Through Tube Channel Pressing: Severe Plastic Deformation
    Farshidi, M. H.
    Kazeminezhad, M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (10) : 2099 - 2105
  • [3] Deformation Behavior of 6061 Aluminum Alloy Through Tube Channel Pressing: Severe Plastic Deformation
    M. H. Farshidi
    M. Kazeminezhad
    Journal of Materials Engineering and Performance, 2012, 21 : 2099 - 2105
  • [4] Deformation Behaviour of Nanocrystalline Al Alloy, Processed by Severe Plastic Deformation
    Vevecka-Priftaj, Aferdita
    Hoeppel, Heinz Werner
    Goeken, Mathias
    7TH INTERNATIONAL CONFERENCE OF THE BALKAN PHYSICAL UNION VOLS 1 AND 2, 2009, 1203 : 151 - +
  • [5] Aging behavior and mechanical properties of 6013 aluminum alloy processed by severe plastic deformation
    Liu, Man-ping
    Jiang, Ting-hui
    Wang, Jun
    Liu, Qiang
    Wu, Zhen-jie
    Yu, Ying-da
    Skaret, Pal C.
    Roven, Hans J.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (12) : 3858 - 3865
  • [6] Severe plastic deformation of 6061 aluminum alloy tube with pre and post heat treatments
    Farshidi, M. H.
    Kazeminezhad, M.
    Miyamoto, H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 563 : 60 - 67
  • [7] Microstructure and strength of metals processed by severe plastic deformation
    Gubicza, Jen
    Chinh, Nguyen Quang
    Langdon, Terence G.
    Ungar, Tamas
    ULTRAFINE GRAINED MATERIALS IV, 2006, : 231 - +
  • [8] Effect of Severe Plastic Deformation and Aging States on Microstructure and Mechanical Properties of 2024 Aluminum Alloy
    Demirtas, Muhammet
    Yanar, Harun
    Uzun, Muhammet
    Ustalar, Melih
    Zhang, Zhenjun
    Dai, Renjie
    Jin, Jiewen
    Purcek, Gencaga
    ADVANCED ENGINEERING MATERIALS, 2025,
  • [9] MECHANICAL PROPERTIES OF ALUMINUM PROCESSED BY SEVERE PLASTIC DEFORMATION
    Comanici, Adrian
    Comaneci, Radu
    MODTECH 2011: NEW FACE OF T.M.C.R., VOL I AND II, 2011, : 281 - 284
  • [10] Stability of microstructure in silver processed by severe plastic deformation
    Gubicza, Jeno
    Chinh, Nguyen Q.
    Labar, Janos L.
    Tichy, Geza
    Hegedus, Zoltan
    Xu, Cheng
    Langdon, Terence G.
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2009, 100 (06) : 884 - 887