Coupling effect of radiative cooling and phase change material on building wall thermal performance

Phase change material (PCM) featured with high latent heat thermal energy storage capacity and isothermal phase transition is employed into building walls decorated with radiative cooling (RC) coating, in order to modify the cooling effect on building thermal performance. Numerical analysis indicates that the RC coating causes exterior temperature of P-RC walls lower than ambient temperature, achieving maximum exterior temperature drop of 13.63 degrees C. Thermal buffer effect of PCM enables to shave the temperature peak and shift the temperature valley, inducing exterior temperature of the P-RC wall to fluctuate slightly in comparison to the RC wall. Interior temperature of the P-RC wall is found to approach to target temperature tightly. PCM located closer to the outside completes phase transition more rapidly, which is beneficial to levelling radiative cooling of RC coating. Exterior temperature of P-RC walls increases with augment of solar radiation intensity, ambient temperature and indoor temperature. Augment of PCM thickness, ambient temperature or indoor temperature is conducive to interior temperature. Latent heat thermal energy storage of PCM enlarges effective thermal capacity of walls, which is favorable to maintain interior temperature within target temperature. In conclusion, studied results highlight that radiation cooling can be improved by PCM, with substantial benefits to develop passive cooling available to building energy conservation.