Preparation and Tribological Properties of Face Centered Cubic TiB Coatings on the Ti6Al4V Alloy

被引：0

作者：

Tu, Yepeng ^{[1
]}

Zhang, Jin ^{[1
]}

Zheng, Xiaojun ^{[1
]}

Ran, Xuelin ^{[1
]}

Wang, Wei ^{[2
,3
]}

Li, Songxia ^{[1
]}

机构：

[1] Southwest Petr Univ, Sch New Energy & Mat, Chengdu 610500, Peoples R China

[2] State Key Lab Long Life High Temp Mat, Deyang 618000, Peoples R China

[3] Dongfang Turbine Co LTD, Deyang 618000, Peoples R China

来源：

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2023年 / 76卷 / 08期

关键词：

Pack boriding; FCC-TiB coating; Microstructure; Wear resistance; BORIDE-COATED TITANIUM; SILICON-NITRIDE; WEAR; MICROSTRUCTURE; LAYERS; KINETICS; SURFACE; DIFFUSION; FRICTION; GROWTH;

D O I：

10.1007/s12666-023-02918-0

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

To improve wear resistance of Ti6Al4V alloys, a face- centered cubic (FCC) TiB coating was fabricated on the surface using pack boriding. The coatings were mainly composed of an outer TiB layer and inner slight TiB whisker. The average surface microhardness values of the coatings prepared at 900-1100 degrees C were 796-1719 HV0.05, which are significantly higher than that of the substrate. The cross-sectional microhardness exhibited a gradient change, which was conducive to the improvement of tribological properties from the coating to the substrate. The wear mechanism of TiB coatings obtained at different temperatures is discussed. The wear rate of the boride coatings prepared at 1100 degrees C against a Si3N4 ball was 1/3rd that of the Ti6Al4V alloy substrate. The coatings exhibited good wear resistance owing to the good anti-wear resistances of the hard TiB phase.

引用

页码：2141 / 2148

页数：8

共 24 条

[1] INVESTIGATIONS ON THE BINARY SYSTEMS OF BORON WITH CHROMIUM, COLUMBIUM, NICKEL, AND THORIUM, INCLUDING A DISCUSSION OF THE PHASE TIB IN THE TITANIUM-BORON SYSTEM
ANDERSSON, LH
KIESSLING, R
[J]. ACTA CHEMICA SCANDINAVICA, 1950, 4 (01): : 160 - 164
[2] Fabrication and Testing of Silicon Nitride Bearings in Total Hip Arthroplasty Winner of the 2007 "HAP" PAUL Award
Bal, B. Sonny
Khandkar, Ashok
Lakshminarayanan, R.
Clarke, Ian
Hoffman, Aaron A.
Rahaman, Mohamed N.
[J]. JOURNAL OF ARTHROPLASTY, 2009, 24 (01) : 110 - 116
[3] Microstructure and wear properties of self-lubricating TiB2-TiCxNy ceramic coatings on Ti-6Al-4V alloy fabricated by laser surface alloying
Dai, Jingjie
Li, Shouying
Zhang, Hongxia
[J]. SURFACE & COATINGS TECHNOLOGY, 2019, 369 : 269 - 279
[4] Ehrlich Paul., 1949, Zeitschrift fur anorganische Chemie, V259, P1
[5] Microstructure of Face Centered Cubic (fcc) TiB Powder Synthesized by Boronizing of Ti Powder
Hu, Jiandong
Dong, Xianfeng
Tosto, Sebastiano
[J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2012, 95 (07) : 2089 - 2092
[6] Characterization and diffusion model for the titanium boride layers formed on the Ti6Al4V alloy by plasma paste boriding
Keddam, Mourad
Taktak, Sukru
[J]. APPLIED SURFACE SCIENCE, 2017, 399 : 229 - 236
[7] Mechanical and tribological behaviour of titanium boride coatings processed by thermochemicals treatments
Khater, Mohammed Amine
Bouaziz, Sabik Abdelhadi
Garrido, M. A.
Poza, P.
[J]. SURFACE ENGINEERING, 2021, 37 (01) : 101 - 110
[8] Tribology of titanium boride-coated titanium balls against alumina ceramic: Wear, friction, and micromechanisms
Lee, Curtis
Sanders, Anthony
Tikekar, Nishant
Chandran, K. S. Ravi
[J]. WEAR, 2008, 265 (3-4) : 375 - 386
[9] Microstructure, Growth Kinetics and Some Mechanical Properties of Boride Layers Produced on Pure Titanium by Molten-Salt Boriding
Ma, L. S.
Duan, Y. H.
Li, P.
[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (09) : 4544 - 4555
[10] Growth kinetics and some mechanical properties of two-phase boride layers produced on commercially pure titanium during plasma paste boriding
Makuch, N.
Kulka, M.
Keddam, M.
Taktak, S.
Ataibis, V.
Dziarski, P.
[J]. THIN SOLID FILMS, 2017, 626 : 25 - 37

← 1 2 3 →