Coaxial Laser Cladding of Fe-Cr-Ni Alloy Powders on to Al 2024 Alloy

被引：0
作者：
Sun, T. [1 ]
Li, L-l. [2 ]
Gao, T. [3 ]
机构：
[1] Liaoning Univ Technol, Sch Chem & Environm Engn, Shiying Rd, Jinzhou 121001, Liaoning Provin, Peoples R China
[2] Chaoyang City Sewage Treatment Project Construct M, 54 Chaoyang Big Rd, Chaoyang 122001, Peoples R China
[3] Chaoyang Ecol Environm Monitoring Ctr Liaoning Pro, 54 Chaoyang Big Rd, Chaoyang 116001, Peoples R China
来源：
LASERS IN ENGINEERING | 2023年 / 55卷 / 3-6期
关键词：
Fibre laser; Al; 2024; Fe-Cr-Ni alloy; coaxial laser cladding; microstructure; elemental distribution; hardness; MATRIX COMPOSITE; SURFACE; WEAR;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In order to reveal the properties of Fe-based powders laser clad with a fibre laser on Al 2024 alloy, the effects of laser power, scanning speed and powder feeding voltage were studied. Spray-dried sintered 64.57% FeCr-Ni alloy powders were directly coated on to Al 2024 alloy by coaxial laser cladding. A large number of single-track and multi-track laser cladding experiments were executed to improve sample forming quality. The microstructure, elemental distribution and hardness of the cladding sample were studied. The influence of overlapping ratio on the flatness of the cladding layer was researched and the optimal overlapping ratio was determined. The damaged area of injection mould for cooling cap of air conditioning in a car was repaired with the coaxial laser cladding technique under the condition of optimized parameters. The research shows that the number of laser cladding passes and the repetition rate have a significant effect on the cladding results. It is a practical method to use Fe-based powder to repair faults on Al-based substrates.
引用
收藏
页码：131 / 141
页数：11
相关论文
共 13 条
  • [1] Laser processing of Fe-based bulk amorphous alloy
    Balla, Vamsi Krishna
    Bandyopadhyay, Amit
    [J]. SURFACE & COATINGS TECHNOLOGY, 2010, 205 (07) : 2661 - 2667
  • [2] Laser cladding with a pulsed Nd:YAG laser and optical fibers
    Brandt, M
    Scott, DA
    Emms, SB
    Yellup, JM
    [J]. JOURNAL OF LASER APPLICATIONS, 1997, 9 (02) : 67 - 75
  • [3] Thermal fatigue resistance of hot work die steel repaired by partial laser surface remelting and alloying process
    Cong, Dalong
    Zhou, Hong
    Ren, Zhenan
    Zhang, Haifeng
    Ren, Luquan
    Meng, Chao
    Wang, Chuanwei
    [J]. OPTICS AND LASERS IN ENGINEERING, 2014, 54 : 55 - 61
  • [4] Effect of defocus manner on laser cladding of Fe-based alloy powder
    Gao, Wenyan
    Zhao, Shusen
    Liu, Falan
    Wang, Yibo
    Zhou, Chunyang
    Lin, Xuechun
    [J]. SURFACE & COATINGS TECHNOLOGY, 2014, 248 : 54 - 62
  • [5] Laser cladding in-situ NbC particle reinforced Fe-based composite coatings with rare earth oxide addition
    Li, Qingtang
    Lei, Yongping
    Fu, Hanguang
    [J]. SURFACE & COATINGS TECHNOLOGY, 2014, 239 : 102 - 107
  • [6] Characteristics of 2024/3003 aluminium alloys bimetal prepared by direct chill casting
    Liu, N.
    Song, X. Y.
    Jie, J. C.
    Fu, Y.
    Li, T. J.
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2014, 30 (11) : 1354 - 1358
  • [7] Mphahlele M., 2019, Tribol Ind, V41, P143, DOI [10.24874/ti.2019.41.02.01, DOI 10.24874/TI.2019.41.02.01]
  • [8] Laser cladding of continuous caster lateral rolls: Microstructure, wear and corrosion characterisation and on-field performance evaluation
    Ray, A.
    Arora, K. S.
    Lester, S.
    Shome, M.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2014, 214 (08) : 1566 - 1575
  • [9] Corrosion resistant nanostructured eutectic high entropy alloy
    Shuang, S.
    Ding, Z. Y.
    Chung, D.
    Shi, S. Q.
    Yang, Y.
    [J]. CORROSION SCIENCE, 2020, 164
  • [10] Wear characteristic of in situ synthetic TiB2 particulate-reinforced Al matrix composite formed by laser cladding
    Xu, J
    Liu, WJ
    [J]. WEAR, 2006, 260 (4-5) : 486 - 492
12