Research Advance on Liquid Lead-Bismuth Eutectic Corrosion Resistant Si Enhanced Ferritic/Martensitic and Austenitic Stainless Steels

被引：5

作者：

Wu Xinqiang ^{[1
]}

Rong Lijian ^{[1
]}

Tan Jibo ^{[1
]}

Chen Shenghu ^{[1
]}

Hu Xiaofeng ^{[1
]}

Zhang Yangpeng ^{[1
]}

Zhang Ziyu ^{[1
]}

机构：

[1] Chinese Acad Sci, Inst Met Res, CAS Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Peoples R China

来源：

ACTA METALLURGICA SINICA | 2023年 / 59卷 / 04期

基金：

中国国家自然科学基金;

关键词：

ferritic/martensitic steel; austenitic stainless steel; liquid metal corrosion; liquid metal embrittlement; mechanical property; microstructure stability; FERRITIC-MARTENSITIC STEEL; CREEP-RUPTURE TESTS; PB-BI; TO-RUPTURE; DEGREES-C; T91; BEHAVIOR; SILICON; TEMPERATURE; CONTACT;

D O I：

10.11900/0412.1961.2022.00531

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Structural materials are one of the major factors that restrict the lead-cooled fast reactor construction due to metallic elements that can dissolve in the liquid lead-bismuth eutectic (LBE), which may affect the structure.. s safety. T91 steel and 316 stainless steel are the leading structural materials for critical equipment such as fuel cladding, reactor vessels, and reactor core internals. The environmental compatibility of those steels with the liquid LBE needs to be systematically evaluated. However, T91 steel and 316 stainless steel suffer from rapid oxidation corrosion in oxygen-saturated LBE at 550oC. T91 steel.. s corrosion resistance in liquid LBE can be improved by decreasing the oxygen concentration (1.26 x 10-6%, mass fraction), but dissolved corrosion occurred at dissolved oxygen concentration below 1 x 10(-6)% for T91 steel and 316 stainless steel. T91 steel is sensitive to liquid metal embrittlement, significantly reducing its corrosion fatigue life in the liquid LBE. Compared to the standard (9%-12%)Cr ferritic/martensitic steel and 316 stainless steel, the microalloyed Si enhanced (9%-12%)Cr ferritic/martensitic steel (9Cr-Si and 12Cr-Si) and 316 stainless steel (ASS-Si) have good microstructural stability and comprehensive mechanical properties. The Si-rich oxide formation in liquid LBE improves the oxide film compactness and corrosion resistance. The dissolution corrosion was inhibited in static oxygen-saturation and oxygen-controlled (10(-6)%-10(-7)%) flowing liquid LBE (0.3 m/s) at 550 degrees C for 9Cr-Si, 12Cr-Si, and ASS-Si. These alloys are expected to meet the design requirements for a lead-cooled fast reactor.

引用

页码：502 / 512

页数：11

共 49 条

[1] Fracture mechanics behavior of the T91 martensitic steel in contact with liquid lead-bismuth eutectic for application in an accelerator driven system [J].

Auger, T. ;

Gorse, D. ;

Hamouche-Hadjem, Z. ;

Van den Bosch, J. ;

Coen, G. ;

Almazouzi, A. ;

Hojna, A. ;

Dalikova, K. ;

Di Gabriele, F. ;

Serrano, M. ;

Gessi, A. ;

Agostini, P. ;

Vogt, J. -B. ;

Serre, I. .

JOURNAL OF NUCLEAR MATERIALS, 2011, 415 (03) :293-301

[2] Ferritic-martensitic steels for fission and fusion applications [J].

Cabet, C. ;

Dalle, E. ;

Gaganidze, E. ;

Henry, J. ;

Tanigawa, H. .

JOURNAL OF NUCLEAR MATERIALS, 2019, 523 :510-537

[3] Effect of oxygen on corrosion of an alumina-forming duplex steel in static liquid lead-bismuth eutectic at 550 °C [J].

Chen, Lingzhi ;

Tsisar, Valentyn ;

Wang, Man ;

Schroer, Carsten ;

Zhou, Zhangjian .

CORROSION SCIENCE, 2021, 189 (189)

[4] Tailoring Microstructure of Austenitic Stainless Steel with Improved Performance for Generation-IV Fast Reactor Application: A Review [J].

Chen, Shenghu ;

Xie, Ang ;

Lv, Xinliang ;

Chen, Sihan ;

Yan, Chunguang ;

Jiang, Haichang ;

Rong, Lijian .

CRYSTALS, 2023, 13 (02)

[5] Effect of silicon on the microstructure and mechanical properties of reduced activation ferritic/martensitic steel [J].

Chen, Shenghu ;

Rong, Lijian .

JOURNAL OF NUCLEAR MATERIALS, 2015, 459 :13-19

[6] Long term corrosion resistance of alumina forming austenitic stainless steels in liquid lead [J].

Ejenstam, Jesper ;

Szakalos, Peter .

JOURNAL OF NUCLEAR MATERIALS, 2015, 461 :164-170

[7] Understanding silicon-rich phase precipitation under irradiation in austenitic stainless steels [J].

Etienne, A. ;

Radiguet, B. ;

Pareige, P. .

JOURNAL OF NUCLEAR MATERIALS, 2010, 406 (02) :251-256

[8] Effect of alloying elements on liquid metal embrittlement of pure BCC Fe in contact with liquid lead-bismuth eutectic: Experiments and first principles calculation [J].

Gong, Xing ;

Sun, Lei ;

Zhang, Feifei ;

Yin, Yuan ;

Huang, Xi ;

Gong, Haoran ;

Liu, Yong .

CORROSION SCIENCE, 2022, 208

[9] Environmental degradation of structural materials in liquid lead-and lead-bismuth eutectic-cooled reactors [J].

Gong, Xing ;

Short, Michael P. ;

Auger, Thierry ;

Charalampopoulou, Evangelia ;

Lambrinou, Konstantina .

PROGRESS IN MATERIALS SCIENCE, 2022, 126

[10] Tensile fracture behavior of notched 9Cr-1Mo ferritic-martensitic steel specimens in contact with liquid lead-bismuth eutectic at 350 °C [J].

Gong, Xing ;

Stergar, Erich ;

Marmy, Pierre ;

Gavrilov, Serguei .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 692 :139-145

← 1 2 3 4 5 →