Influence of the temperature field on the formation of thermally foamed silicate materials based on industrial waste

被引：1

作者：

Yatsenko, Elena A. ^{[1
]}

Goltsman, Boris M. ^{[1
]}

Izvarin, Andrey I. ^{[1
]}

Kurdashov, Viktor M. ^{[1
]}

Chaudhary, Sandeep ^{[1
]}

Smoliy, Victoria A. ^{[1
]}

Ryabova, Anna V. ^{[1
]}

Klimova, Lyudmila V. ^{[1
]}

Vilbitskaya, Natalia A. ^{[1
]}

机构：

[1] Platov South Russian State Polytech Univ NPI, Novocherkassk 346428, Russia

来源：

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY | 2024年 / 149卷 / 06期

基金：

俄罗斯科学基金会;

关键词：

Porous silicate materials; Foaming; Ash-slag waste; Temperature field; Structure formation; FLY-ASH; GLASS FOAM; INSULATION; SLAG; CONDUCTIVITY; FABRICATION;

D O I：

10.1007/s10973-023-12845-3

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The article studies the influence of the temperature field on the formation of foamed silicate materials based on different wastes, such as glass cullet and ash-slag waste. Calculations of the batch composition for the production of foamed materials were carried out. The samples were synthesized, and their physical properties were studied. It was discovered that the processes during heat treatment of porous silicate materials can be divided into two qualitatively different stages: a low-temperature heating until sintering and a high-temperature heating from sintering to melting. The effect of temperature field distribution on the dynamics of porous structure formation was described. The dependence of viscosity on temperature for different types of waste was studied. The temperatures at which the porous structure is formed were determined. The influence of foaming agent on foaming intensity was discussed. Practical conclusions on adjusting a temperature and raw materials' composition to obtain a uniform porous structure were made.

引用

页码：2537 / 2548

页数：12

共 54 条

[1] Prediction of foaming temperature of glass in the presence of various oxidizers via thermodynamics route [J].

Abdollahi, Sorosh ;

Yekta, Bijan Eftekhari .

CERAMICS INTERNATIONAL, 2020, 46 (16) :25626-25632

[2] Performance characteristics and practical applications of common building thermal insulation materials [J].

Al-Homoud, MS .

BUILDING AND ENVIRONMENT, 2005, 40 (03) :353-366

[3]

[Anonymous], 2013, PART SIZ CONV TABL, P63114

[4] Characteristics variation of coal combustion residues in an Indian ash pond [J].

Asokan, P ;

Saxena, M ;

Aparna, A ;

Asoletar, SR .

WASTE MANAGEMENT & RESEARCH, 2004, 22 (04) :265-275

[5] Thermal Insulation Material Based on Local Technogenic Raw Material [J].

Baidzhanov, D. O. ;

Nuguzhinov, Zh. S. ;

Fedorchenko, V. I. ;

Kropachev, P. A. ;

Rakhimov, A. M. ;

Divak, L. A. .

GLASS AND CERAMICS, 2017, 73 (11-12) :427-430

[6] Effect of Temperature and Water Glass Addition on the Microstructure and Physical Properties of Soda-Lime Foam Glass [J].

Bashiri, A. ;

Amirhosseini, A. ;

Mirkazemi, S. M. ;

Ghanbari, H. .

GLASS PHYSICS AND CHEMISTRY, 2021, 47 (02) :83-90

[7] Study of Foam Glass with High Content of Fly Ash Using Calcium Carbonate as Foaming Agent [J].

Chen, Bo ;

Wang, Keqiang ;

Chen, Xingjun ;

Lu, Anxian .

MATERIALS LETTERS, 2012, 79 :263-265

[8] Materials selection guidelines for low thermal conductivity thermal barrier coatings [J].

Clarke, DR .

SURFACE & COATINGS TECHNOLOGY, 2003, 163 :67-74

[9] Recycling of glass waste into foam glass boards: A comparison of cradle-to-gate life cycles of boards with different foaming agents [J].

da Silva, Robson Couto ;

Puglieri, Fabio Neves ;

de Genaro Chiroli, Daiane Maria ;

Bartmeyer, Guilherme Antonio ;

Kubaski, Evaldo Toniolo ;

Tebcherani, Sergio Mazurek .

SCIENCE OF THE TOTAL ENVIRONMENT, 2021, 771

[10] Optimal conditions and significant factors for fabrication of soda lime glass foam from industrial waste using nano AlN [J].

Ewais, Emad Mohamed M. ;

Attia, Mohammed A. A. ;

El-Amir, Ahmed A. M. ;

Elshenway, Ahmed M. H. ;

Fend, Thomas .

JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 747 :408-415

← 1 2 3 4 5 6 →