A new approach for cobalt (II) removal from simulated wastewater using electro membrane extraction with a flat sheet supported liquid membrane

The aim of this work was to efficiently remove cobalt (Co) from aqueous solutions by using a novel Electromembrane Extraction (EME) technique. This novel electrochemical cell design featured two distinct glass chambers, incorporating a Supported Liquid Membrane (SLM) composed of a polypropylene flat membrane saturated with 1-octanol and a carrier substance, as well as electrodes constructed from graphite and stainless steel. The investigation covered an exploration of various effective parameters like, carrier type, voltage across the cell, donor so-lution pH, and the initial Co concentration, with the overarching goal of comprehending their individual effect on Co removal efficiency. Notably, two different carriers, tris(2-ethylhexyl) phosphate (TEHP) and bis(2-ethylhexyl) phosphate (DEHP), were systematically evaluated in combination with 1-octanol. The findings underscored the pivotal role of the cell voltage in significantly enhancing the mass transfer rate of cobalt across the membrane, thereby advancing the effectiveness of the removal process. After a comprehensive optimization process, the optimal operating conditions were established as follows: employing 1-octanol with 1.0 % v/v bis(2-ethylhexyl) phosphate as a carrier, applying a voltage of 60 V, maintaining an initial pH of 5, utilizing an initial cobalt concentration of 15 mg/L, conducting an extraction for 6 h, and employing a stirring rate of 1000 rpm. Remarkably, these conditions led to the attainment of an impressive removal efficiency of 87 %. In stark contrast, when no voltage was applied, the removal efficiency did not surpass 40 %. This underscores the pivotal role of the applied voltage in enhancing the cobalt removal process under the specified conditions.