Performance Improvement of Dye-Sensitized Solar Cells with Pressed TiO2 Nanoparticles Layer

A simple and low-cost fabrication method of dye-sensitized solar cells (DSSCs) was developed to improve the structure and performance of the photoanode with the pressed layer and compact TiO2 thin film using spin coating, screen printing, and mechanical compression. In this study, four different TiO2 layers were adopted to fabricate photoanodes: a mesoporous TiO2 nanoparticles (NPs) layer, a pressed TiO2 NPs layer, a mesoporous TiO2 NPs layer on the TiO2 compact thin film, and a pressed TiO2 NPs layer on the TiO2 compact thin film. The compact thin film was deposited on the fluorine-doped tin oxide (FTO) glass via spin coating, while the mesoporous TiO2 NPs layer was deposited via the screen-printing method. The pressed TiO2 NPs layer was produced by compressing the mesoporous TiO2 NPs layer with a hydraulic press machine. When using the pressed TiO2 NPs layer for the photoanode of DSSC, the power conversion efficiency of DSSC was enhanced the most. The electron lifetime for DSSC with photoanodes based on the pressed TiO2 NPs and mesoporous TiO2 NPs layers were 8.217 and 6.287 ms, respectively. The power conversion efficiency of DSSC with photoanodes based on the pressed TiO2 NPs layer was 5.4%, while that based on the mesoporous TiO2 NPs layer was 4.08%. DSSC with photoanodes based on the pressed TiO2 NPs layer showed a significant increase in the power conversion efficiency by 36.16% compared to that based on the mesoporous TiO2 NPs layer.