Investigation of gypsum composites with different lightweight fillers: A physico-mechanical characterisation regarding possibilities for building applications

被引:10
作者
Alvarez, Manuel [1 ]
Santos, Paulo [2 ]
Ferrandez, Daniel [1 ]
机构
[1] Univ Politecn Madrid, Escuela Tecn Super Edificac, Dept Tecnol Edificac, Avda Juan Herrera 6, Madrid 28040, Spain
[2] Univ Coimbra, Dept Civil Engn, ISISE, ARISE, Rua Luis Reis Santos Polo II Univ, P-3030788 Coimbra, Portugal
关键词
Lightened plaster; Geomaterials; Super absorbent polymers; Precast; MECHANICAL-PROPERTIES; PLASTER; FIBERS; REINFORCEMENT; POLYSTYRENE; BEHAVIOR; SILICA; WASTE;
D O I
10.1016/j.jobe.2023.107813
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper shows the characterization of a new lightened gypsum-based material for use in buildings. Super absorbent polymer (SAP) Potassium Polyacrylate has been used as main lightener leading to a 20% density reduction. In addition, tests have been carried out with the lightened plaster material reinforced with vermiculite (VER), recycled glass wool (RGW), expanded clay (EC). A significant improvement in physical properties was achieved. After material evaluation, a new precast design was elaborated and tested for its use in building. Physicalmechanical properties of these new material have been studied. A complementary ignitability test was also conducted to set this material's suitability for its use in building. All samples performed over standard minimum requirements. Samples containing RGW obtained best results in both, thermal conductivity, and acoustic absorption.
引用
收藏
页数:15
相关论文
共 64 条
[51]   Influence of polypropylene residues on the physico-mechanical and water-resistance properties of gypsum plasters [J].
Romero-Gomez, M., I ;
Silva, R., V ;
Flores-Colen, I ;
de Brito, J. .
JOURNAL OF CLEANER PRODUCTION, 2022, 371
[52]   A comprehensive review on the mechanical properties of waste tire rubber concrete [J].
Roychand, Rajeev ;
Gravina, Rebecca J. ;
Zhuge, Yan ;
Ma, Xing ;
Youssf, Osama ;
Mills, Julie E. .
CONSTRUCTION AND BUILDING MATERIALS, 2020, 237
[53]  
S.A. Ursa, 2022, Especificaciones Tecnicas URSA TERRA T18R/T18P
[54]  
Saez Paola Villoria, 2016, 8 ELAGEC
[55]   Reinforcement of building plaster by waste plastic and glass [J].
Salim, Kennouche ;
Houssam, Abdelli ;
Belaid, Amrane ;
Brahim, Hami .
3RD INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY (ICSI 2019), 2019, 17 :170-176
[56]   Lightweight material made with gypsum and extruded polystyrene waste with enhanced thermal behaviour [J].
San-Antonio-Gonzalez, Alicia ;
Del Rio Merino, Mercedes ;
Vinas Arrebola, Carmen ;
Villoria-Saez, Paola .
CONSTRUCTION AND BUILDING MATERIALS, 2015, 93 :57-63
[57]   Thermal Performance Improvement of Double-Pane Lightweight Steel Framed Walls Using Thermal Break Strips and Reflective Foils [J].
Santos, Paulo ;
Ribeiro, Telmo .
ENERGIES, 2021, 14 (21)
[58]   Characterization of mechanically activated fly ash-based lightweight geopolymer composite prepared with ultrahigh expanded perlite content [J].
Szabo, Roland ;
Dolgos, Fanni ;
Debreczeni, Akos ;
Mucsi, Gabor .
CERAMICS INTERNATIONAL, 2022, 48 (03) :4261-4269
[59]   Effect of borax and sodium tripolyphosphate on fluidity of gypsum paste plasticized by polycarboxylate superplasticizer [J].
Tan, Hongbo ;
Deng, Xiufeng ;
Gu, Benqing ;
Ma, Baoguo ;
Luo, Shuqiong ;
Zhi, Zhenzhen ;
Guo, Yulin ;
Zou, Fubing .
CONSTRUCTION AND BUILDING MATERIALS, 2018, 176 :394-402
[60]   Modification Of Gypsum Binders By Using Carbon Nanotubes And Mineral Additives [J].
Tokarev, Yurii ;
Ginchitsky, Evgeniy ;
Sychugov, Stanislav ;
Krutikov, Vyacheslav ;
Yakovlev, Grigoriy ;
Buryanov, Alexander ;
Senkov, Sergey .
MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES, 2017, 172 :1161-1168