Effect of crack flank holes on fatigue crack growth

被引：4

作者：

Neto, D. M. ^{[1
]}

Cavaleiro, N. ^{[1
]}

Sergio, E. R. ^{[1
]}

Jesus, J. ^{[1
,2
]}

Camacho-Reyes, A. ^{[3
]}

Antunes, F. V. ^{[1
]}

机构：

[1] Univ Coimbra, Ctr Mech Engn Mat & Proc, Mech Engn Dept, CEMMPRE, P-3030788 Coimbra, Portugal

[2] Lisbon Polytech ISEL, Dept Mech Engn, Rua Conselheiro Emidio Navarro 1, P-1959007 Lisbon, Portugal

[3] Univ Jaen, Dept Ingn Mecan & Minera, Jaen, Spain

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2023年 / 170卷

关键词：

Fatigue crack growth; CT specimen; Crack flank holes; Crack closure; Numerical simulation; COLD-EXPANSION; RETARDATION; INDENTATION; OVERLOAD; CLOSURE; STRESS; REPAIR; ARREST; STEEL; TIP;

D O I：

10.1016/j.ijfatigue.2023.107505

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The effect of drilling two symmetric holes along the crack flanks on the fatigue crack growth (FCG) rate was evaluated numerically. The FCG increases (decreases) when the crack tip is behind (ahead) the holes. This behaviour is enlarged both by increasing the diameter of the holes and by reducing the distance between them. This is consequence of the geometrical effect, which modifies the plastic zone size. Experimental work validated the numerical model, indicating that that cumulative plastic strain at the crack tip is an adequate crack driving force and that cyclic plastic deformation is the main damage mechanism of FCG.

引用

页数：11

共 50 条

[41] Effect of welding residual stresses on fatigue crack growth thresholds
Biallas, Gerhard
INTERNATIONAL JOURNAL OF FATIGUE, 2013, 50 : 10 - 17
[42] Crack closure and effect of load variation on small fatigue crack growth behaviour
Jono, M
Sugeta, A
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1996, 19 (2-3) : 165 - 174
[43] Effect of plate thickness and load history on fatigue crack growth
Codrington, John
Kotousoy, Andrei
Wildy, Stuart
Ho, Sook Ying
ADVANCES IN FRACTURE AND DAMAGE MECHANICS VIII, 2010, 417-418 : 201 - 204
[44] The effect of high compressive loading on residual stresses and fatigue crack growth at cold expanded holes
Stefanescu, D
Dutta, M
Wang, DQ
Edwards, L
Fitzpatrick, ME
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2003, 38 (05) : 419 - 427
[45] The effect of cold expansion on fatigue crack growth from open holes at room and high temperature
Lacarac, VD
Smith, DJ
Pavier, MJ
INTERNATIONAL JOURNAL OF FATIGUE, 2001, 23 : S161 - S170
[46] Effect of plasma nitriding on fatigue crack growth on AISI 4140 steel under variable amplitude loading
Sengul, A. B.
Celik, A.
SURFACE & COATINGS TECHNOLOGY, 2011, 205 (21-22) : 5172 - 5177
[47] The effect of compression stresses, stress level and stress order on fatigue crack growth of multiple site damage
Kim, J-H
Chau-Dinh, T.
Zi, G.
Kong, J-S
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2012, 35 (10) : 903 - 917
[48] Critical investigation on the effect of steel strength on fatigue crack growth retardation including a single tensile overload
Gadallah, Ramy
Tsutsumi, Seiichiro
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2019, 104
[49] On the theoretical modeling of fatigue crack growth
Hosseini, Zahra S.
Dadfarnia, Mohsen
Somerday, Brian P.
Sofronis, Petros
Ritchie, Robert O.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2018, 121 : 341 - 362
[50] A cohesive zone model for fatigue crack growth allowing for crack retardation
Ural, Ani
Krishnan, Venkat R.
Papoulia, Katerina D.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2009, 46 (11-12) : 2453 - 2462

← 1 2 3 4 5 →