Evolution of microstructure and mechanical characteristics of friction stir welded ultrafine-grained aluminum alloy 6082Entwicklung des Gefuges und der mechanischen Eigenschaften der reibruhrgeschweissten ultrafeinkornigen Aluminiumlegierung 6082

Bulk production of ultrafine-grained material is in great demand presently. Ultrafine-grained material can be synthesized using accumulative roll bonding, which is a prominent severe plastic deformation technique to develop such materials in bulk. There are further challenges in the fabrication of ultrafine-grained material. Friction stir welding is a potential technique to join the ultrafine-grained material while maintaining its mechanical and microstructural characteristics stability as no fusion is required. The present research work demonstrates the microstructural and mechanical characteristics of various welding zone after friction stir welding of ultrafine-grained aluminum alloy 6082. The microstructural features were examined using optical microscopy and the electron back-scattered diffraction technique. The variation in mechanical characteristics was observed using tensile and microhardness tests. The fractography of tensile specimens was studied to identify the mode of failure. The present study demonstrates the viability of friction stir welding to join ultrafine-grained aluminum alloy 6082 developed by accumulative roll bonding. The ultrafine grain size of 0.52 & mu;m was achieved after four accumulative roll bonding cycles. The microhardness of accumulative roll bonding processed samples and the tensile strength of the weld joint were increased about two times and 1.6 times respectively compared to the annealed sample.