Wetting of Al2O3 by Cu-xTi alloys at 1373 K

被引：5

作者：

Lin, Qiaoli ^{[1
]}

Xie, Kaibin ^{[1
]}

Ma, Zhongbao ^{[1
]}

机构：

[1] Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, 287 Langongping Rd, Lanzhou 730050, Peoples R China

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2024年 / 44卷 / 06期

基金：

中国国家自然科学基金;

关键词：

Wettability; Oxides; Adsorption; Brazing; Interface; Joining; COPPER-TITANIUM ALUMINA; KINETICS; WETTABILITY; DYNAMICS; METALS; CARBON;

D O I：

10.1016/j.jeurceramsoc.2024.01.025

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Wetting of Al2O3 by molten Cu-xTi alloys with wide composition range was deeply studied. The results show that the precipitation of TiO at the interface is depended on the Ti concentration in the alloys as well as the oxygen partial pressure in the atmosphere. When Ti concentration is lower than the critical Ti concentration, the wettability of the system is mainly determined by the precipitated TiO and the adsorption of Ti-O clusters at the interface; conversely, it is mainly determined by the adsorption of Ti-O clusters on the surface of alumina. For the spreading dynamics of: Cu-Ti alloys on the sapphire surface, the existence of two stages were observed: firstly, an initial fast spreading stage, which is mainly limited by the reaction rate of TiO precipitation; followed by a later slow spreading stage, which is mainly limited by the precipitation reaction of Al2O, and exhibits a stepwise spreading characteristic.

引用

页码：3995 / 4007

页数：13

共 50 条

[21] Cu segregation at the Al(Cu)Al2O3 interface
Copel, M
Rodbell, KP
Tromp, RM
APPLIED PHYSICS LETTERS, 1996, 68 (12) : 1625 - 1627
[22] SOME OBSERVATIONS ON THE WETTING OF AL2O3 BY ALUMINUM
CARNAHAN, RD
JOHNSTON, TL
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1958, 41 (09) : 343 - 347
[23] Processing and characterization of Al2O3 and Al2O3/Cu alloy composites
McCuiston, RC
Danforth, SC
Niesz, DE
ELECTROACTIVE POLYMERS AND RAPID PROTOTYPING, 2002, 698 : 257 - 261
[24] REPLICA METHOD FOR AL/AL2O3 ALLOYS
LEFFERS, T
JOURNAL OF ULTRASTRUCTURE RESEARCH, 1966, 14 (3-4): : 412 - &
[25] Electrodeposition of Ni-Cu-γ-Al2O3 alloys into deep recesses
Panda, A
Podlaha, EJ
MAGNETIC MATERIALS, PROCESSES, AND DEVICES VII AND ELECTRODEPOSITION OF ALLOYS, PROCEEDINGS, 2003, 2002 (27): : 696 - 705
[26] Intrinsic wettability and wetting dynamics in the Al/α-Al2O3 system
Shen, P
Fujii, H
Matsumoto, T
Nogi, K
CHARACTERIZATION AND CONTROL OF INTERFACES FOR HIGH QUALITY ADVANCED MATERIALS, 2005, 146 : 113 - 119
[27] Wetting of (0001) α-Al2O3 single crystals by molten Al
Shen, P
Fujii, H
Matsumoto, T
Nogi, K
SCRIPTA MATERIALIA, 2003, 48 (06) : 779 - 784
[28] On the role of orifice wetting for Al and Al22.5 wt%Cu with Al2O3 in the discharge crucible method
Flood, R. S. P.
Henein, H.
JOURNAL OF MOLECULAR LIQUIDS, 2022, 345
[29] Wetting of solid Al2O3 with molten CaO-Al2O3-SiO2
Choi, JY
Lee, HG
ISIJ INTERNATIONAL, 2003, 43 (09) : 1348 - 1355
[30] Powder metallurgical fabrication of SiC and Al2O3 reinforced Al-Cu alloys
Podlesak, H.
Siebeck, S.
Muecklich, S.
Hockauf, M.
Meyer, L. W.
Wielage, B.
Weber, D.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2009, 40 (07) : 500 - 505

← 1 2 3 4 5 →