Improved tribological and electrochemical behavior of concentrated chromite coatings developed by HVOF and plasma spray techniques

Mineral coatings have the ability to tackle the most common degradation processes (wear and corrosion) in industries at amazing 'quality to cost' ratio, as compared to synthetic ceramics. In the current study, concentrated natural chromite with 55 wt.% Chromium oxide (Cr2O3) is deposited on steel substrate through High Velocity Oxygen Fuel (HVOF) and Atmospheric plasma spray (APS) techniques. Effect of deposition processes and Cr2O3 enrichment on microstructure, hardness, tribological and electrochemical behavior of coatings is studied. Tribological tests were performed using pin-on-disc setup, coatings deposited with APS have shown excellent wear resistance behavior as compared to HVOF coating. Owing to the brittle nature of chromite coatings, they were worn by abrasive wear irrespective of the deposition process. Electrochemical behavior of coatings is evaluated by potentiodynamic polarization measurements and electrochemical impedance spectroscopy (EIS) in 3.5% NaCl solution. APS and HVOF coatings have exhibited very high protective efficiency of 93 and 88% respectively, against steel substrate. Equivalent electrical circuit (EEC) based on EIS results has also been conceptualized and verified with ZSimpWin analysis software. Established EEC has illustrated capacitive behavior due to the protective oxide nature of coatings. Despite having relatively higher porosities in APS coatings, they display an excellent potential for wear and corrosion resistant applications. Results revealed that hardness, compactness, tribological and corrosion performance of chromite coatings have been substantially improved due to higher Cr2O3 content.(c) 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).