3D printing of a wood-based furniture element with liquid deposition modeling

被引：4

作者：

Bodenschatz, Uwe ^{[1
]}

Rosenthal, Michael ^{[2
]}

机构：

[1] Westsachs Hsch Zwickau, Zwickau, Germany

[2] Tech Univ Dresden, Dresden, Germany

来源：

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS | 2024年 / 82卷 / 01期

关键词：

Energy efficiency - Extruders - Fused Deposition Modeling - Wood;

D O I：

10.1007/s00107-023-01996-7

中图分类号：

S7 [林业];

学科分类号：

0829 ; 0907 ;

摘要：

Liquid deposition modeling is an energy-efficient, additive manufacturing process for pasty materials. Physical material properties were determined for a water-based paste consisting of the binder carboxymethyl cellulose and wood flour. A continuously operating dual screw extruder was developed, which was used to manufacture a table frame with a height of 18 cm.

引用

收藏

页码：241 / 244

页数：4

相关论文

共 10 条

[1]

Dritsas Stylianos., 2018, CONSTRUCTION ROBOTIC, VII, P41, DOI DOI 10.1007/S41693-018-0011-0

[2] Novel materials can radically improve whole-system environmental impacts of additive manufacturing [J].

Faludi, Jeremy ;

Van Sice, Corrie M. ;

Shi, Yuan ;

Bower, Justin ;

Brooks, Owen M. K. .

JOURNAL OF CLEANER PRODUCTION, 2019, 212 :1580-1590

[3]

Gardan J., 2014, INT J ENG RES APPL, V4, P123

[4] Use of wood powder and adhesive as a mixture for 3D printing [J].

Kariz, Mirko ;

Sernek, Milan ;

Kuzman, Manja Kitek .

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2016, 74 (01) :123-126

[5]

Orji BO, 2023, EUR J WOOD WOOD PROD, V81, P45, DOI 10.1007/s00107-022-01861-z

[6] Investigation into the material properties of wooden composite structures with in-situ fibre reinforcement using additive manufacturing [J].

Pitt, Kate ;

Lopez-Botello, Omar ;

Lafferty, Austin D. ;

Todd, Iain ;

Mumtaz, Kamran .

COMPOSITES SCIENCE AND TECHNOLOGY, 2017, 138 :32-39

[7] Physical properties of wood-based materials for liquid deposition modeling [J].

Rosenthal, Michael ;

Rueggeberg, Markus ;

Gerber, Christian ;

Beyrich, Lukas ;

Faludi, Jeremy .

RAPID PROTOTYPING JOURNAL, 2023, 29 (05) :1004-1013

[8] Liquid Deposition Modeling: a promising approach for 3D printing of wood [J].

Rosenthal, Michael ;

Henneberger, Clara ;

Gutkes, Anna ;

Bues, Claus-Thomas .

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2018, 76 (02) :797-799

[9] Large-scale additive manufacturing with bioinspired cellulosic materials [J].

Sanandiya, Naresh D. ;

Vijay, Yadunund ;

Dimopoulou, Marina ;

Dritsas, Stylianos ;

Fernandez, Javier G. .

SCIENTIFIC REPORTS, 2018, 8

[10] Use of Wood in Additive Manufacturing: Review and Future Prospects [J].

Tomec, Dasa Krapez ;

Kariz, Mirko .

POLYMERS, 2022, 14 (06)