Study on the influence of the combustion chamber baffle on atomization characteristics of gas-centered swirl coaxial injector

被引：1

作者：

Wang, Shaoyan ^{[1
]}

Qiao, Wentong ^{[1
]}

Zhang, Dingwei ^{[1
]}

Zhang, Bingbing ^{[1
]}

Fu, Qingfei ^{[1
,2
]}

机构：

[1] Beihang Univ, Sch Astronaut, Beijing 100191, Peoples R China

[2] Beihang Univ, Ningbo Inst Technol, Ningbo 315800, Peoples R China

来源：

ACTA ASTRONAUTICA | 2024年 / 215卷

关键词：

Gas -centered swirl coaxial injector; Combustion chamber baffle; Atomization characteristics; Spray uniformity; HEAT-TRANSFER; SPRAY CHARACTERISTICS; HYDRAULIC JUMPS; IMPINGEMENT; JET; IGNITION; FLOW;

D O I：

10.1016/j.actaastro.2023.11.041

中图分类号：

V [航空、航天];

学科分类号：

08 ; 0825 ;

摘要：

The combustion chamber baffle is an important means to suppress the combustion instability of the combustion chamber of liquid rocket engine. In order to study the influence of spray impacting on the baffle on the atom-ization characteristics of injector, sufficient experimental research has been carried out in this paper. In the present study, the effects of different gas/liquid flow rates and different baffle structures on the atomization characteristics are investigated. The results show that for gas-centered swirl coaxial injector, a wall film is formed on the baffle when the spray impinges on the baffle and it is broken into liquid ligaments and droplets down-stream of the baffle by centrifugal force, resulting in a slower spray velocity near the baffle, a significantly larger sauter mean diameter, an increase in flow flux downstream of the baffle and worse spray uniformity. In addition, it is found that there is a spray zoning phenomena by comparing the spray with different baffles.

引用

页码：54 / 68

页数：15

共 36 条

[1]

[Anonymous], 1995, 31 AIAA ASME SAE ASE

[2] The break phenomenon of self-pulsation for liquid-centered swirl coaxial injectors [J].

Bai, Xiao ;

Cao, Pengjin ;

Li, Qinglian ;

Cheng, Peng .

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2021, 142

[3] Fountain flows produced by multiple impinging jets in a crossflow [J].

Barata, JMM .

AIAA JOURNAL, 1996, 34 (12) :2523-2530

[4]

Beltaos S., 1976, J HYDRAUL RES, V14, P17, DOI [10.1080/00221687609499685, DOI 10.1080/00221687609499685]

[5] Evaporation and ignition of droplets in combustion chambers modeling and simulation [J].

Betelin, V. B. ;

Smirnov, N. N. ;

Nikitin, V. F. ;

Dushin, V. R. ;

Kushnirenko, A. G. ;

Nerchenko, V. A. .

ACTA ASTRONAUTICA, 2012, 70 :23-35

[6] SHALLOW-WATER APPROACH TO THE CIRCULAR HYDRAULIC JUMP [J].

BOHR, T ;

DIMON, P ;

PUTKARADZE, V .

JOURNAL OF FLUID MECHANICS, 1993, 254 :635-648

[7] The influence of surface tension on the circular hydraulic jump [J].

Bush, JWM ;

Aristoff, JM .

JOURNAL OF FLUID MECHANICS, 2003, 489 :229-238

[8] PIV measurements in a twin-jet STOVL fountain flow [J].

Cabrita, PM ;

Saddington, AJ ;

Knowles, K .

AERONAUTICAL JOURNAL, 2005, 109 (1100) :439-449

[9] Measurement of annular liquid film thickness in an open-end swirl injector [J].

Fu, Qing-fei ;

Yang, Li-jun ;

Qu, Yuan-yuan .

AEROSPACE SCIENCE AND TECHNOLOGY, 2011, 15 (02) :117-124

[10] The circular hydraulic jump [J].

Higuera, FJ .

PHYSICS OF FLUIDS, 1997, 9 (05) :1476-1478

← 1 2 3 4 →