A direct preset method for solving ease-off tooth surface of spiral bevel gear

被引：16

作者：

Chen, Peng ^{[1
]}

Wang, Sanmin ^{[1
]}

Li, Fei ^{[1
]}

Zou, Haoran ^{[1
]}

机构：

[1] Polytech Univ, Xian 710072, Peoples R China

来源：

MECHANISM AND MACHINE THEORY | 2023年 / 179卷

关键词：

Spiral bevel gears; Ease-off topography; Contact path; Geometric transmission error; Curvature of difference curve; CPTE-CDC method; FLANK MODIFICATION METHODOLOGY; CONTACT PERFORMANCE; HYPOID GEARS;

D O I：

10.1016/j.mechmachtheory.2022.105123

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In order to realize the global integrated control of spiral bevel gear tooth surface, this paper presents a direct preset method for solving ease-off tooth surface of spiral bevel gear. This method integrates the preset contact path (CP), geometric transmission error (TE) and curvature of difference curve at the contact point (CDC), which is called CPTE-CDC. Based on the relationship between ease-off and tooth surface planning grid, CPTE-CDC is used to establish a nonlinear overdetermined equations to solve ease-off surface equation. According to the ease -off surface obtained from the solution, the ease-off target tooth surface of pinion related to cuttting parameters is established, and its optimal machining parameters are solved based on Levenberg-Marquardt (LM) algorithm. Finally, a numerical example is created using TCA and LTCA techniques. The results show that the tooth surface obtained by CPTE-CDC method not only meets the preset contact characteristics, but also meets the design requirements, which proves the correctness of the proposed method. CPTE-CDC method can be used as a theoretical basis for improving the global control of spiral bevel gear tooth surface.

引用

页数：18

共 38 条

[11]

Fang Z.D., 1998, MECH TRANSM, V22, P4

[12] Robust Optimization of the Loaded Contact Pattern in Hypoid Gears With Uncertain Misalignments [J].

Gabiccini, M. ;

Bracci, A. ;

Guiggiani, M. .

JOURNAL OF MECHANICAL DESIGN, 2010, 132 (04) :0410101-0410108

[13]

Jiang J., 2019, J XIAN JIAOTONG U, V53, P1

[14]

Kolivand M, 2010, DETC2009: PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES/COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, P245

[15]

Lee H.T., 1989, THESIS U ILLINOIS CH

[16]

Litvin F.L., 2004, Gear geometry and applied theory

[17] A METHOD OF LOCAL SYNTHESIS OF GEARS GROUNDED ON THE CONNECTIONS BETWEEN THE PRINCIPAL AND GEODETIC CURVATURES OF SURFACES [J].

LITVIN, FL ;

GUTMAN, Y .

JOURNAL OF MECHANICAL DESIGN-TRANSACTIONS OF THE ASME, 1981, 103 (01) :114-125

[18]

Madsen K, 2004, METHODS NONLINEAR LE, Vsecond

[19]

Mu Y., 2019, Ph.D. thesis

[20] 高重合度弧齿锥齿轮高阶传动误差设计与分析 [J].

牟彦铭 ;

方宗德 ;

张西金 .

华中科技大学学报(自然科学版), 2018, 46 (07) :67-72

← 1 2 3 4 →