Environmental and Socio-Economic Assessment of Biomass Pellets Biofuel in Hazara Division, Pakistan

被引:5
作者
Hassan, Maaz [1 ]
Usman, Naveed [1 ]
Hussain, Majid [1 ]
Yousaf, Adnan [2 ]
Khattak, Muhammad Aamad [3 ]
Yousaf, Sidra [4 ]
Mishr, Rankeshwarnath Sanjay [3 ]
Ahmad, Sana [5 ,6 ]
Rehman, Fariha [7 ]
Rashedi, Ahmad [8 ]
机构
[1] Univ Haripur, Dept Forestry & Wildlife Management, Hattar Rd, Haripur City 22620, Pakistan
[2] Univ Tuscia, Dept Innovat Biol Agrifood & Forestry Syst DIBAF, I-01100 Viterbo, Italy
[3] Univ Padua, Dept Land Environm Agr & Forestry, I-35020 Legnaro, Italy
[4] Univ Haripur, Dept Chem, GPGC Women, Hattar Rd, Haripur City 22620, Pakistan
[5] Bahria Univ Med, Dept Biochem, Karachi 74400, Pakistan
[6] Dent Coll, Karachi 74400, Pakistan
[7] COMSATS Univ Islamabad CUI, Dept Econ, Lahore Campus, Lahore 54000, Pakistan
[8] Charles Darwin Univ, Coll Engn IT & Environm, Ellengowan Dr, Casuarina, NT 0810, Australia
关键词
wood pellets; life cycle assessment; characterization; footprint family; economic analysis; LIFE-CYCLE ASSESSMENT; WOOD-PELLET; MOISTURE-CONTENT; CHEMICAL-COMPOSITION; WATER FOOTPRINT; ENERGY; DENSITY; FUEL; SUSTAINABILITY; BENEFITS;
D O I
10.3390/su151512089
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
A thorough life cycle assessment (LCA) was conducted to determine whether wood pellets were a viable substitute for non-renewable fuels like oil and gas, especially for heating. To evaluate the properties of wood pellets and their effects on the environment, the study was conducted in the Hazara division of Khyber Pakhtunkhwa, Pakistan. A few factors were investigated, including the carbon and water footprints and the identification of potential growth opportunities in the production of wood pellets. One kilogram of wood pellets served as the analysis reference unit. Raw materials were obtained from sawmills and furniture stores to make the wood pellets. Sawdust, a bio binder, and lubricating oil were used in the production process along with the pelletizer machine. SimaPro 9.2 software was used in the environmental footprint assessment to evaluate several environmental effects, including eutrophication, ozone depletion, abiotic depletion, rusting, human toxicity, and aquatic ecotoxicity. The highest contribution was shown by the wood pellets produced from the softwood sawdust as 149.8558 in marine aquatic ecotoxicity. The study's findings showed that using lubricating oil during the production of wood pellets significantly affected the overall environmental results. The characterization of wood pellets showed that the Higher heating Values (HHV) resulted from burning wood pellets made from sawdust of Melia azedarach as 24.79 MJ/kg. Softwood mixed species recorded the highest water footprint and damage assessment impact and the highest carbon footprint of 0.186 CO2 e. With a 3.84 x 10(-7) DALY (disability-adjusted life years) measurement, softwood mixed species showed the highest contribution to human health damage among the damage categories. In terms of cost, producing one kilogram of wood pellets from softwood mixed species was priced at 22 PKR, the lowest among the assessed species. The highest cost of 26 PKR was associated with producing wood pellets from Parthenium hysterophorus and Diospyros lotus.
引用
收藏
页数:23
相关论文
共 74 条
[1]   Qualitative Characterization of the Pellet Obtained from Hazelnut and Olive Tree Pruning [J].
Acampora, Andrea ;
Civitarese, Vincenzo ;
Sperandio, Giulio ;
Rezaei, Negar .
ENERGIES, 2021, 14 (14)
[2]   Small-scale biomass gasification CHP utilisation in industry: Energy and environmental evaluation [J].
Adams, P. W. R. ;
McManus, M. C. .
SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, 2014, 6 :129-140
[3]   Comparative cradle-to-gate life cycle assessment of wood pellet production with torrefaction [J].
Adams, P. W. R. ;
Shirley, J. E. J. ;
McManus, M. C. .
APPLIED ENERGY, 2015, 138 :367-380
[4]  
Alakangas E., 2010, FINBIO PUBLICATIONS, V47, P329
[5]   Biomass for a sustainable bioeconomy: An overview of world biomass production and utilization [J].
Antar, Mohammed ;
Lyu, Dongmei ;
Nazari, Mahtab ;
Shah, Ateeq ;
Zhou, Xiaomin ;
Smith, Donald L. .
RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2021, 139
[6]   Characterization and combustion behaviour of commercial and experimental wood pellets in South West Europe [J].
Arranz, J. I. ;
Miranda, M. T. ;
Montero, I. ;
Sepulveda, F. J. ;
Rojas, C. V. .
FUEL, 2015, 142 :199-207
[7]   Physical, mechanical and energy characterization of wood pellets obtained from three common tropical species [J].
Artemio, Carrillo Parra ;
Maginot, Ngangyo Heya ;
Serafin, Colin-Urieta ;
Rahim, Foroughbakhch Pournavab ;
Jose Guadalupe, Rutiaga Quinones ;
Fermin, Correa-Mendez .
PEERJ, 2018, 6
[8]   An integrated wood pellet supply chain development: Selecting among feedstock sources and a range of operating scales [J].
Boukherroub, Tasseda ;
LeBel, Luc ;
Lemieux, Sebastien .
APPLIED ENERGY, 2017, 198 :385-400
[9]   Recovery of agricultural and wood wastes: The effect of biomass blends on the quality of pellets [J].
Brand, Martha Andreia ;
Rodrigues, Taise Mariano ;
da Silva, Julio Peretti ;
de Oliveira, Juliana .
FUEL, 2021, 284
[10]   How to measure the impact of biogenic residues, wastes and by-products: Development of a national resource monitoring based on the example of Germany [J].
Brosowski, Andre ;
Krause, Tim ;
Mantau, Udo ;
Mahro, Bernd ;
Noke, Anja ;
Richter, Felix ;
Raussen, Thomas ;
Bischof, Roland ;
Hering, Thomas ;
Blanke, Christian ;
Mueller, Paul ;
Thraen, Daniela .
BIOMASS & BIOENERGY, 2019, 127