Lubricant mechanisms of eco-friendly lubricant blended with mineral oil for steel-steel contact

被引：20

作者：

Basiron, Juliana ^{[1
]}

Abdollah, Mohd Fadzli Bin ^{[1
,2
]}

Abdullah, Muhammad Ilman Chua ^{[2
,3
]}

Amiruddin, Hilmi ^{[1
,2
]}

机构：

[1] Univ Teknikal Malaysia Melaka, Fak Kejuruteraan Mekanikal, Durian Tunggal 76100, Melaka, Malaysia

[2] Univ Teknikal Malaysia Melaka, Ctr Adv Res Energy, Durian Tunggal 76100, Melaka, Malaysia

[3] Univ Teknikal Malaysia Melaka, Fak Teknol Kejuruteraan Mekanikal & Pembuatan, Durian Tunggal 76100, Melaka, Malaysia

来源：

TRIBOLOGY INTERNATIONAL | 2023年 / 186卷

关键词：

Non -edible vegetable oil; Lubricant mechanisms; Wear; Friction; TRIBOLOGICAL PROPERTIES; VEGETABLE-OILS; SIO2; NANOPARTICLES; STRIBECK CURVE; BIO-LUBRICANT; JATROPHA OIL; FATTY-ACIDS; ENGINE OIL; SESAME OIL; BIODIESEL;

D O I：

10.1016/j.triboint.2023.108653

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This study intends to explore the lubrication mechanism of eco-friendly lubricant formulated from non-edible vegetable oils and mineral oil. The efficacy of the lubricant as friction and wear-reduction additive is determined to have a mixed lubrication regime with the optimum concentration of 80 % S100, 10 % C100, and 10 % J100 (S80C10J10). A protective film and mending effect have been suggested as lubricating mechanisms. The lubrication regime is changed from mixed to hydrodynamic by increasing the volume percent of C100 and J100, which improves the COF because fluid drags cause friction to be produced by the fluid on the moving surface. The inability of the additive to form a protective layer led to the worst COF and WSD.

引用

页数：21

共 98 条

[51]

Lewis M.W.J., 1989, EQUIPMENT FAILURE CA

[52] The effectiveness of palm oil methyl ester as lubricant additive in milling and four-ball tests [J].

Liew, Willey Yun Hsien ;

Dayou, Sebastian ;

Dayou, Jedol ;

Siambun, Nancy J. ;

Bin Ismail, Mohd Azlan .

INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2014, 8 (2-3) :153-172

[53] Investigation of the mending effect and mechanism of copper nano-particles on a tribologically stressed surface [J].

Liu, G ;

Li, X ;

Qin, B ;

Xing, D ;

Guo, Y ;

Fan, R .

TRIBOLOGY LETTERS, 2004, 17 (04) :961-966

[54] Lubricant permeation from micro oil pits under intimate contact condition [J].

Lo, SW ;

Horng, TC .

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1999, 121 (04) :633-638

[55] An experimental investigation of dimple effect on the stribeck curve of journal bearings [J].

Lu, Xiaobin ;

Khonsari, M. M. .

TRIBOLOGY LETTERS, 2007, 27 (02) :169-176

[56] Vegetable-based biodegradable lubricating oil additives [J].

Maleque, MA ;

Masjuki, HH ;

Sapuan, SM .

INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2003, 55 (2-3) :137-143

[57] The Stribeck curve as a suitable characterization method of the lubricity of biodiesel and diesel blends [J].

Maru, Marcia M. ;

Trommer, Rafael M. ;

Cavalcanti, Katia F. ;

Figueiredo, Elizabeth S. ;

Silva, Rui F. ;

Achete, Carlos A. .

ENERGY, 2014, 69 :673-681

[58]

Metrohm, 2015, 899 COUL

[59]

Mohammed AS, 2017, LUBRICANTS, V5, DOI 10.3390/lubricants5030023

[60]

Nadeem H., 2020, EVALUATION OIL TRIBO, V03, P17

← 1 2 3 4 5 6 7 8 9 10 →