Lubricant mechanisms of eco-friendly lubricant blended with mineral oil for steel-steel contact

被引：17
作者：
Basiron, Juliana [1 ]
Abdollah, Mohd Fadzli Bin [1 ,2 ]
Abdullah, Muhammad Ilman Chua [2 ,3 ]
Amiruddin, Hilmi [1 ,2 ]
机构：
[1] Univ Teknikal Malaysia Melaka, Fak Kejuruteraan Mekanikal, Durian Tunggal 76100, Melaka, Malaysia
[2] Univ Teknikal Malaysia Melaka, Ctr Adv Res Energy, Durian Tunggal 76100, Melaka, Malaysia
[3] Univ Teknikal Malaysia Melaka, Fak Teknol Kejuruteraan Mekanikal & Pembuatan, Durian Tunggal 76100, Melaka, Malaysia
来源：
TRIBOLOGY INTERNATIONAL | 2023年 / 186卷
关键词：
Non -edible vegetable oil; Lubricant mechanisms; Wear; Friction; TRIBOLOGICAL PROPERTIES; VEGETABLE-OILS; SIO2; NANOPARTICLES; STRIBECK CURVE; BIO-LUBRICANT; JATROPHA OIL; FATTY-ACIDS; ENGINE OIL; SESAME OIL; BIODIESEL;
D O I：
10.1016/j.triboint.2023.108653
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This study intends to explore the lubrication mechanism of eco-friendly lubricant formulated from non-edible vegetable oils and mineral oil. The efficacy of the lubricant as friction and wear-reduction additive is determined to have a mixed lubrication regime with the optimum concentration of 80 % S100, 10 % C100, and 10 % J100 (S80C10J10). A protective film and mending effect have been suggested as lubricating mechanisms. The lubrication regime is changed from mixed to hydrodynamic by increasing the volume percent of C100 and J100, which improves the COF because fluid drags cause friction to be produced by the fluid on the moving surface. The inability of the additive to form a protective layer led to the worst COF and WSD.
引用
收藏
页数：21
相关论文
共 98 条
  • [1] Improving the tribological characteristics of piston ring assembly in automotive engines using Al2O3 and TiO2 nanomaterials as nano-lubricant additives
    Ali, Mohamed Kamal Ahmed
    Hou Xianjun
    Mai, Liqiang
    Cai Qingping
    Turkson, Richard Fiifi
    Chen Bicheng
    [J]. TRIBOLOGY INTERNATIONAL, 2016, 103 : 540 - 554
  • [2] The petal effect of parahydrophobic surfaces offers low receding contact angles that promote effective boiling
    Allred, Taylor P.
    Weibel, Justin A.
    Garimella, Suresh, V
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 135 : 403 - 412
  • [3] [Anonymous], 2003, A D2896 03 DESIGNATI, P1
  • [4] [Anonymous], 1999, ASTM INT, V94, P1
  • [5] Scaling hard vertical surfaces with compliant microspine arrays
    Asbeck, Alan T.
    Kim, Sangbae
    Cutkosky, M. R.
    Provancher, William R.
    Lanzetta, Michele
    [J]. INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH, 2006, 25 (12) : 1165 - 1179
  • [6] ASTM International, 2018, ASTM INT, P159
  • [7] Temperature effect on tribological properties of polyol ester-based environmentally adapted lubricant
    Aziz, Nur Atiqah Mohamad
    Yunus, Robiah
    Rashid, Umer
    Zulkifli, Nurin Wahidah Mohamad
    [J]. TRIBOLOGY INTERNATIONAL, 2016, 93 : 43 - 49
  • [8] Friction and wear response of vegetable oils and their blends with mineral engine oil in a reciprocating sliding contact at severe contact conditions
    Bahari, Adli
    Lewis, Roger
    Slatter, Tom
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2018, 232 (03) : 244 - 258
  • [9] Bart JCJ, 2010, WOODHEAD PUBL SER EN, P1, DOI 10.1533/9781845697761
  • [10] Basiron J., 2023, FORMULATION TRIBOLOG, P1
12345678910