Evaluation of the fracture resistance and failure types of different CAD-CAM ceramic crowns supported by angled titanium abutments

被引:0
作者
Yuksel, Merve [1 ]
Saygin, Aysegul Goze [1 ]
Bolayir, Giray [1 ]
机构
[1] Sivas Cumhuriyet Univ, Dept Prosthodont, Sivas, Turkey
来源
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY | 2023年 / 32卷 / 07期
关键词
angled abutments; CAD-CAM blocks; chewing simulator; fracture resistance; zirconia; BOND STRENGTH; RESIN CEMENTS; IMPLANT; PERFORMANCE; RETENTION; THICKNESS;
D O I
10.1111/jopr.13596
中图分类号
R78 [口腔科学];
学科分类号
1003 ;
摘要
Purpose To evaluate the fatigue resistance of computer-aided design and computer-aided manufacturing (CAD-CAM) single-ceramic crowns which were applied on angled implant abutments after thermomechanical aging. Materials and Methods Titanium abutments (N = 72, MODE Medical Dental Implant, Turkey) with three different angles (0, 15 degrees, and 25 degrees) were restored using different materials (monolithic zirconia [Zir], lithium silicate ceramic reinforced by zirconia [VS], and hybrid ceramic [VE]). Crowns in the maxillary first premolar form were cemented to abutments using resin cement (Panavia 2.0 Introkit). Dynamic loading and thermomechanical aging were applied to the specimens (120,000 cycles, 49 N, 5-55 degrees C). Fracture resistance values were measured in the universal test machine and fracture types were determined. Two-way ANOVA and Tukey test were used for statistical analysis (Jamovi version 2.3.5). Results Both the abutment angle and the type of material had a significant effect on fracture resistance (F = 3.295, p < 0.05). The highest fracture resistance was obtained in Group 0-Zir, and the lowest fracture resistance was obtained in Group 15-VE. Fracture resistance showed significant differences between Group 0 and Group 15 for the Zir and VE materials, and between Group 0 and Group 25 for VS (p < 0.05); no statistical significance was determined between the other groups (p>0.05). When failure types were evaluated, they were seen to be full or partial crown fractures, and abutment deformation was found in some samples. Conclusions Monolithic crowns may be preferred on angled abutments. The fracture resistance of CAD-CAM materials decreases as the angle of abutments increases. Monolithic zirconia has higher fracture resistance than other materials.
引用
收藏
页码:594 / 601
页数:8
相关论文
共 32 条
  • [1] Fracture Resistance of Titanium, Zirconia, and Ceramic-Reinforced Polyetheretherketone Implant Abutments Supporting CAD/CAM Monolithic Lithium Disilicate Ceramic Crowns After Aging
    Atsu, Saadet Saglam
    Aksan, M. Emin
    Bulut, Ali Can
    [J]. INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS, 2019, 34 (03) : 622 - 630
  • [2] Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness
    Awad, Daniel
    Stawarczyk, Bogna
    Liebermann, Anja
    Ilie, Nicoleta
    [J]. JOURNAL OF PROSTHETIC DENTISTRY, 2015, 113 (06) : 534 - 540
  • [3] Belser U C, 1996, Pract Periodontics Aesthet Dent, V8, P875
  • [4] In vitro performance of full-contour zirconia single crowns
    Beuer, Florian
    Stimmelmayr, Michael
    Gueth, Jan-Frederik
    Edelhoff, Daniel
    Naumann, Michael
    [J]. DENTAL MATERIALS, 2012, 28 (04) : 449 - 456
  • [5] Camargos GD, 2012, INT J ORAL MAX IMPL, V27, P935
  • [6] Chun HJ, 2006, INT J ORAL MAX IMPL, V21, P195
  • [7] Fracture strength of implant abutments after fatigue testing: A systematic review and a meta-analysis
    Coray, Rafaela
    Zeltner, Marco
    Ozcan, Mutlu
    [J]. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2016, 62 : 333 - 346
  • [8] Mechanical performance of implant-supported posterior crowns
    de Kok, Paul
    Kleverlaan, Cornelis J.
    de Jager, Niek
    Kuijs, Ruud
    Feilzer, Albert J.
    [J]. JOURNAL OF PROSTHETIC DENTISTRY, 2015, 114 (01) : 59 - 66
  • [9] Microstructural and Mechanical Characterization of CAD/CAM Materials for Monolithic Dental Restorations
    de Mendonca, Arthur Furtado
    Shahmoradi, Mahdi
    Depes de Gouvea, Cresus Vinicius
    De Souza, Grace M.
    Ellakwa, Ayman
    [J]. JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY, 2019, 28 (02): : E587 - E594
  • [10] Thermal compatibility of dental ceramic systems using cylindrical and spherical geometries
    DeHoff, Paul H.
    Barrett, Allyson A.
    Lee, Robert B.
    Anusavice, Kenneth J.
    [J]. DENTAL MATERIALS, 2008, 24 (06) : 744 - 752